Rechercher

Introduction The Fuel Safety Handbook is intended to provide the basic information which is essential to gas technicians working with natural gas and propane fuel gases in Ontario. The Fuel Safety Handbook is intended to address the knowledge needed by Ontario gas technicians seeking to fulfill the requirements of the new Training and Certification Regulation (348/96) under the Energy Act,…

1. Scope 1.1 This Standard specifies requirements for the mechanical, electrical, and environmental performance of connectors designed for installation on the bare surface of overhead line conductors. Note: Although the requirements of this Standard were developed primarily for connections to aluminum conductors, the requirements are also applicable to connectors for copper-to-copper or aluminum…

1.1 SCOPe 1.1.1 This standard applies to newly produced, automatic storage water heaters having input ratings of 75,000 Btu per hour (21 980 W) or less (see Part IV, Definitions) hereinafter referred to as water heaters or appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use…

1. Scope 1.1 This Standard applies to (a) all windows covered by CSA Standard A440, including (i) vertical sliding windows; (ii) horizontal sliding windows; (iii) tilt-and-turn windows; (iv) casement windows, both fixed and operable; (v) projecting (awning/hopper) windows, and (vi) fixed windows, including fixed-window…

CAN/CSA-A5-98 Portland Cement 1. Scope 1.1 Scope This Standard addresses the definition of Portland cement; the chemical, physical, and uniformity requirements; the tests required; the procedures for inspection and sampling; the units of measurement, packaging, marking, and storage. 1.2 Types The five types of Portland cement covered in this Standard are identified as follows: Type…

1. Scope 1.1 Scope This Standard addresses the definition of Portland cement; the chemical, physical, and uniformity requirements; the tests required; the procedures for inspection and sampling; the units of measurement, packaging, marking, and storage. 1.2 Types The five types of Portland cement covered in this Standard are identified as follows…

1. Scope 1.1 General This Standard addresses the definition of blended hydraulic cement; its chemical and physical requirements; the tests required; the procedures for inspection and sampling; the units of measurement; and its packaging, marking, and storage. The intent of this Standard is to define the properties of the blended product; it does not include cases in which the…

1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V intended for agricultural use, for control of domestic farm and feral animals. Note 1 - Examples of electric fence energizers coming within the scope of this standard are: - mains-operated…

This National Standard of Canada is equivalent to International Standard ISO 11135:1994. 1 Scope 1.1 This International Standard establishes requirements and guidance for validation and routine control of ethylene oxide sterilization processes for medical devices. Particular attention is drawn to the need for specific testing for safety, quality and efficacy, possibly exceeding the…

1. Scope 1.1 Applicability This Standard defines the alphanumeric lexical sequence for the English and French languages, corresponding to Canadian cultural expectations. It is intended for general-purpose sorting of alphanumeric strings using the character repertoire of CSA Standards CAN/CSA-Z243.4 and T500, wherever human intervention is involved or sorted results are presented to users. 1.2…