Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 155: 1993. 1 Scope This standard specifies interchangeable glow-starters used with pre-heat type fluorescent lamps, hereafter called "starters". Section 1 specifies the general and safety requirements with which starters shall comply. Section 2 specifies the performance. NOTE - Starters…

1. Scope and Overview The provisions of this Standard embody the principles and practices applicable for the purpose of effecting electrical coordination between organizations that operate electric supply or communications systems, where interference exists or is expected to exist between their networks. The Standard provides experienced personnel with influence and susceptibility guidance…

This International Standard specifies the main dimensions, location and number of fittings, materials and quality of manufacture for small weathertight steel hatches for application on board ships in order to ensure interchangeability of the hatches. The remaining dimensions are left to the manufacturer. The hatches are suitable for loading operations and for giving access to storage compartments…

Prescribes specified values for the electrical and mechanical characteristics and for the principal dimensions of string insulator units of the long rod type with insulating parts of ceramic material intended for a.c. overhead lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. It is also applicable to insulators of similar design, used in substations.…

This National Standard of Canada is based on International Standard CEI/IEC 1008-1: 1990, (first edition, 1990-12), with Corrigendum 1990 and Amendments 1:1992 and 2:1995. 1. Scope This International Standard applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporating…

This National Standard of Canada is based on International Standard CEI/IEC 926:1995 1. Scope This standard specifies general and safety requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-042: 1997. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This standard applies to AUTOCLAVES and STERILIZERS, including those with an automatic loading and unloading system, which incorporate a CHAMBER using toxic gas intended for the treatment of…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-043: 1997. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This standard applies to STERILIZERS, including those having an automatic loading and unloading system, with one or more C HAMBERS operating at approximately atmospheric pressure and using…

1. Scope This Standard applies to flexible cords, cables, and hoistway cables ra ted at 125, 300, or 600 V and intended for use in accordance with the Rules of the Canadian Electrical Code, Part I. Note: The intended uses of flexible cords or cables specified in this Standard are based on past experience and do not necessarily cover all situations.

This International Standard specifies a rapid method for the determination of the oil and water contents of commercial oilseeds using pulsed nuclear magnetic resonance (NMR). It is applicable to rapeseeds, soya beans, linseeds and sunflower seeds with a water content less than 10 %. For seeds with higher water contents, drying is necessary before the oil content can be determined by pulsed NMR.…