Rechercher

1. Scope 1.1 This Standard describes requirements and test methods for materials, dimensions, quality of work, pipe stiffness, quality control, joining systems, and a form of marking for PVC (polyvinyl chloride) profile sewer pipe and fittings of pipe stiffness PS70 and PS320, based on controlled inside diameter. Notes: (1) Pipe and fittings produced to meet the requirements of this…

1. Scope 1.1 This Standard describes requirements and test methods for the materials, dimensions, quality of work, pipe stiffness, quality control, jointing systems, and marking for corrugated polyethylene (PE) storm and sanitary sewer pipe and fittings with a smooth interior. This profile wall pipe consists of an outer corrugated wall fused to a smooth inner wall, with sizes based on…

1. Scope Note: Pipe made to this Standard should not be used in the production of fabricated fittings, due to the lack of field data. 1.1 This Standard describes requirements and test methods for materials, dimensions, quality of work, pipe stiffness, quality control, jointing systems, and marking for SDR 28, 35, and 41 multilayer PVC sewer pipe (PSM type). Note: Industrial waste…

1. Scope 1.1 This Standard provides the requirements for installation and testing of thermoplastic pipe used for the conveyance of drain, storm, and sanitary effluent in gravity flow systems. Note: Users of this Standard should recognize that installation specifications cover a broad range of conditions for thermoplastic pipe. The engineer should tailor the installation specification to…

This International Standard specifies two test methods, designated method A and method B, for checking the leaktightness of glass-reinforced thermosetting plastics (GRP) pipes and fittings under short-term internal pressure. Method A is a hydraulic test applicable to a pipe under uniaxial stress. Method B is a pneumatic test applicable to fittings. NOTE Test methods for the leaktightness of…

This International Standard specifies a method, by analysis of inorganic carbon, for the evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic substances at a given concentration of microorganisms. This International Standard is applicable to organic compounds which are: a) water-soluble under the test conditions; b) poorly water-soluble under the test conditions,…

This International Standard specifies a high-performance liquid chromatographic (HPLC) method for the determination of the furazolidone content of premixtures and animal feeding stuffs. The method is applicable to animal feeding stuffs with a furazolidone content of 25 mg/kg to 5 000 mg/kg and to premixtures with a mass fraction of furazolidone of up to 20 % [formerly written as 20 % (m/m)]. NOTE…

This International Standard specifies requirements, test methods, and marking, labelling and packaging, as appropriate,of both permanent and temporary single-point anchor devices exclusively for the attachment of personalprotective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travelrestriction (work restraint).It is applicable only to anchor…

La présente partie de l'ISO 5267 spécifie une méthode de détermination de l'égouttabilité d'une suspension aqueuse de pâte en fonction de l'indice Schopper-Riegler (SR). L'essai Schopper-Riegler est conçu pour donner la mesure de la vitesse à laquelle l'eau peut être extraite d'une suspension de pâte diluée. Il a été démontré que l'égouttabilité est…

1. Scope 1.1 This Standard states a health care facility's requirements for (a) plumbing installations; (b) pure water systems; (c) plumbing fixtures and fittings; and (d) hydraulic fire protection systems. Notes: (1) Users of this Standard are referred to CSA Standard CAN/CSA-Z305.1 for the design, installation, certification, and maintenance requirements of nonflammable…