Rechercher

This International Standard specifies test methods for metric self-locking nuts with MJ threads intended for use in aerospace construction at maximum operating temperatures less than or equal to 425 °C. It describes the test device and the method for each test. It applies to self-locking nuts as defined above, provided that the relevant documents (dimensional standard, drawing, procurement…

This National Standard of Canada is equivalent to International Standard ISO/IEC 12087-1:1995 (first edition, 1995-04-15). 1 Scope ISO/IEC 12087 is concerned with the manipulation, processing, and interchange of all types of digital images. The main purpose of this part is to define a generic, unifying imaging architecture to which other parts of ISO/IEC 12087 conform. This part of ISO/…

This National Standard of Canada is equivalent to International Standard ISO 13485:1996. 1 Scope This International Standard specifies, in conjunction with ISO 9001, the quality system requirements for the design/development, production and, when relevant, installation and servicing of medical devices. This International Standard, in conjunction with ISO 9001, is applicable when…

1. Scope 1.1 This Standard specifies the test methods to be used in measuring the energy efficiency of three-phase induction motors, in support of a consumer/user information program. The method of determining and marking the nominal efficiency values is also specified. Note: The test methods contained in this Standard are not limited to specific types of motors, but where this…

1. Scope 1.1 This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive…

1. Scope 1.1 These requirements apply to single and multiple-jacketed lined fire hose of the following nominal inside diameter trade sizes: 38, 45, 50, 65, 75, 89, 100, 125, and 150 mm. 1.2 These requirements do not cover couplings nor their method of attachment. 1.3 Single-jacketed hose, intended for service test pressures of 1035, 1380, or 1725 kPa, is primarily intended for use…

1.1 This International Standard specifies a method for determining the in-plane shear modulus (G12) of fibrereinforced plastic composites using a standard plate specimen. When applied to isotropic materials, the shear modulus measured is independent of direction. 1.2 The method is used to determine the shear modulus of the test specimens but not to determine the shear strength. It applies to a…

1.1 This International Standard establishes requirements for certifying an assessment that an Ada language processor conforms to the requirements of the Ada language standard, ISO/IEC 8652. It places requirements on the organization that performs the assessment, the assessment procedures, and the test suite used in the assessment. Finally, it places requirements on the form for the certificate of…

This part of ISO 10303 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange of building element shape, property, and spatial configuration information between application systems with explicit shape representations. Building elements are those physical things of which a building is composed, such as structural elements, enclosing and…

1.1 This International Standard establishes requirements for certifying an assessment that an Ada language processor conforms to the requirements of the Ada language standard, ISO/IEC 8652. It places requirements on the organization that performs the assessment, the assessment procedures, and the test suite used in the assessment. Finally, it places requirements on the form for the certificate of…