Rechercher

This International Standard specifies dimensions for lubrication holes, grooves and pockets for bearing bushes. These dimensions can be entered, e.g. on drawings, using the designation examples. Their use depends in particular on the specific operating conditions. In addition, it enables the user to assign the different types of lubricant feed and distribution to plain bearing bushes made of…

This International Standard specifies the Additional Network Feature (ANF) Call Identification and Call Linkage (CIDL), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. ANF-CIDL is an additional network feature which allows the identification and correlation of calls throughout a PISN by…

This International Standard specifies the Additional Network Feature (ANF) Call Identification and Call Linkage (CIDL), which is applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/IEC 11574. ANF-CIDL is an additional network feature which allows the identification and correlation of calls throughout a PISN by…

This International Standard specifies the principal characteristics of grooved pulleys (for groove sections 9N/J, 15N/J and 25N/J) intended to take both single and joined narrow V-belts for industrial power transmission drives. Some background information on the series of effective diameters is given in annex A. NOTE The effective width of a groove is regarded as the basic dimension of…

This International Standard specifies the signalling protocol for the support of the Call Identification and Call Linkage Additional Network Feature (ANF-CIDL) at the Q reference point between Private Integrated Network Services Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). ANF-CIDL is an additional network feature which allows the assignment of a…

This International Standard specifies the signalling protocol for the support of the Call Identification and Call Linkage Additional Network Feature (ANF-CIDL) at the Q reference point between Private Integrated Network Services Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). ANF-CIDL is an additional network feature which allows the assignment of a…

1. Scope 1.1 This Standard provides criteria for the aspects of HVAC systems that are particular to health care facilities. These criteria lead to more stringent requirements that are above and beyond those generally applied in planning, designing, constructing, commissioning, maintaining, and operating HVAc systems. 1.2 This Standard sets values of certain parameters, identifies…

1. Scope 1.1 This Standard applies to ac and dc type power supplies, including rack-mounted and modular units, that (a) are of dry or liquid-filled construction; (b) have a rated voltage not exceeding 600 V; and (c) are for commercial, industrial, and residential indoor and outdoor use in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. Note:…

1. Scope 1.1 This Standard outlines a means for certifying eligible welding inspectors by examination in one of three levels. It describes the responsibilities associated with each level and the basic technical functions of welding inspectors. This Standard also outlines a means of registering welding inspection trainees. Note: The certification document should indicate in relation…

This International Standard specifies signalling interworking between "QSIG" and "H.323" in support of call diversion supplementary services within a Corporate telecommunication Network (CN). "QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX) within a Private Integrated Services Network (PISN).…