1. Scope
1.1
This Standard sets out requirements for the proper selection, use, and care of respirators and for the administration of an effective respiratory protection program in the workplace.
1.2
This Standard is not intended to address the selection of respirators for use against
(a) infectious agents; and
(b) nuclear biological chemical (NBC) agents.
This Standard applies to…
Spacers and Holding Chambers for Use with Metered-Dose Inhalers
1. Scope
1.1
This Standard sets out requirements for spacers and/or holding chambers (S-HCs) for use with pressurized
metered-dose inhalers. It stipulates the material and components, the packaging and labelling, and
aerosol characterization as determined by in vitro testing.
1.2
This Standard does not address
(a) pressurized metered-dose inhalers (pMDIs) and the medications that are delivered…
ISO 12710 describes a set of procedures for the measurement of any performances in an ultrasonic test instrument that has a display screen.
This International Standard establishes the procedures for measuring performance characteristics of components of pulse-echo ultrasonic non-destructive testing instruments including both analog and digital type instruments with screen displays. The aim is to…
1. Scope
1.1 General
This Standard covers seamless electric-welded pipe (flash-welded pipe and low-frequency electric-welded pipe excluded), and submerged-arc-welded pipe primarily intended for use in oil or gas pipeline systems.
Notes:
(1) Flash-welded pipe is pipe manufactured by a process using electric-resistance heating to produce a simultaneous coalescence over the entire area…
Health and Safety Code for Suspended Equipment Operations
1 Scope
1.1
This Standard includes requirements for the safe operation of various types of suspended equipment used to gain access to interior or exterior, or both, sides of buildings or structures. Much of the equipment referred to in this Standard is designed, installed, inspected, and tested in accordance with CAN/CSA-Z271. It does not include crane-suspended platforms or baskets (see CAN/CSA…
Information technology — Telecommunications and information exchange between systems — High-level da...
This International Standard specifies the frame structures, the elements of procedures, the classes of procedures, the content
and format of the general purpose Exchange Identification (XID) frame, and a means for resolution/negotiation of a data link
layer address in switched environments for data communication systems using bit-oriented high-level data link control
(HDLC) procedures.
NOTE The…
Information technology - Telecommunications and information exchange between systems - High-level da...
This International Standard specifies the frame structures, the elements of procedures, the classes of procedures, the content
and format of the general purpose Exchange Identification (XID) frame, and a means for resolution/negotiation of a data link
layer address in switched environments for data communication systems using bit-oriented high-level data link control
(HDLC) procedures.
NOTE The…
1 Scope
1.1
This Standard applies to helmets and face shields intended to provide protection to the heads and faces of law correctional officers and enforcement personnel from blows with blunt objects (e.g., rocks, stones, glass bottles, pipes, baseball bats, and wooden planks; see Annex B for typical energies for some of these objects) during riots, inmate control situations, and in any other…
Information technology - Telecommunications and information exchange between systems - Private Integ...
ISO/IEC 11582:2002 defines the signalling protocol for the control of Supplementary Services and Additional Network Features (ANFs) at the Q reference point. The protocol is part of Private Signalling System no. 1 (PSS1), known informally as QSIG. The Q reference point exists between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services…
Information technology — Telecommunications and information exchange between systems — Private Integ...
ISO/IEC 11582:2002 defines the signalling protocol for the control of Supplementary Services and Additional Network Features (ANFs) at the Q reference point. The protocol is part of Private Signalling System no. 1 (PSS1), known informally as QSIG. The Q reference point exists between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services…
