Rechercher

ISO/TR 17784:2003 contains general information on rubber and plastic hoses with regard to both their properties and their practical application. This includes, amongst other things, the properties of materials used in hoses, the precautions to be taken when storing hoses and the care required when installing and fitting hoses and their couplings. Safety measures when testing hoses are also…

1. Scope 1.1 This Standard applies to tanks, other than intermediate bulk containers and tubes, used for the transportation of dangerous goods primarily by road. It considers the design, construction, certification, assembly, modification, repair, testing, inspection and periodic retesting, maintenance, and identification of such tanks. Additional design and construction requirements for…

This National Standard of Canada is equivalent to International Standard ISO 10012:2003 (first edition, 2003-04-15). 1 Scope This International Standard specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies the…

1. Scope 1.1 This Standard details the requirements for the selection and use, handling, filling, and unloading of highway tanks, portable tanks, cargo compartments, and containers when they are used as a primary means of containment for the transportation of dangerous goods of Classes 3, 4, 5, 6.1, 8, and 9. 1.2 This Standard sets out certain minimum requirements for the selection of the…

1. Scope 1.1 This Standard details the requirements for the selection and use, handling, filling, and unloading of highway tanks, portable tanks, and multi-unit tank car tanks used as means of containment for the transportation of dangerous goods of Class 2. 1.2 This Standard sets out certain minimum requirements for the selection of the appropriate means of containment for the…

This National Standard of Canada is based on International Standard CEI/IEC 61347-1:2000 (first edition, 2000-10). 1 Scope The object of this Part 1 Standard is to specify general electrical safety requirements for certain products. The requirements of this Standard apply to a specific end-use product when it is explicitly referred to by that product standard. Each individual product…

ISO/TS 17573:2003 specifies a system architecture for electronic fee collection (EFC) systems concerning vehicle related transport services such as the use of toll roads, zone access, parking and route guidance. ISO/TS 17573:2003 does not cover person related transport services such as public transport. However, some of the clauses in ISO/TS 17573:2003 may also be applicable for fare collection…

ISO 899-2:2003 specifies a method for determining the flexural creep of plastics in the form of standard test specimens under specified conditions such as those of pretreatment, temperature and humidity. It applies only to a simple freely supported beam loaded at mid-span (three-point-loading test). The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-…

1 Scope 1.1 This Standard provides requirements for public-use playspaces and play equipment intended for use by children aged 18 months to 12 years with anthropometric limits based on the 95th percentile. Notes: 1) The level of challenge required and desired by children varies enormously with age, physical development, and emotional development. Consequently, it is almost impossible to…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-43:2000 (first edition, 2000-06). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for prolonged RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES. Its scope…