Rechercher

ISO 7743:2004 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber, using a standard test piece, a product or a part of a product. Three procedures are given: using a standard test piece with the metal plates lubricated;using a standard test piece with the metal plates bonded to the test piece;using a product or a part of a…

1 Scope 1.1 This Standard provides definitions, classifications, and a method for determining specific daily energy consumption (SDEC) values and states minimum energy efficiency requirements for refrigerated display cabinets. 1.2 This Standard applies to refrigerated display cabinets, as described in Clause 4 and shown in Figures 1 to 7, that are intended for displaying and merchandising food…

1 Scope 1.1 This Standard covers manual transfer panels having maximum ratings of 250 V, 60 A, for use in non-hazardous locations in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard covers manual transfer panels that are intended for use on the load side of a distribution on a single-phase, 2-wire or 3-wire system to provide manual switching from the normal supply…

1 Scope 1.1 This Standard applies to indoor open and enclosed and outdoor enclosed assemblies of switchgear devices such as (a) switches; (b) interrupting devices; (c) air circuit breakers; (d) power circuit breakers; and (e) control, metering, protective, and regulating equipment with associated interconnections and supporting structures. 1.2 This Standard covers equipment with nominal…

This is a Bi-National standard, with ARI-310/380-2004. 1 Scope 1.1 This Standard applies to factory-manufactured residential, commercial, and industrial packaged terminal air-conditioners and heat pumps as defined in Clause 3. 1.2 This Standard applies to electrically operated vapour-compression refrigeration systems. 1.3 Packaged terminal air-conditioners and heat pumps are intended for…

This National Standard of Canada is equivalent to International Standard ISO/TR 14047:2003. 1 Scope This Technical Report provides examples to illustrate current practice in carrying out a life cycle impact assessment in accordance with ISO 14042. These are only examples of the total possible .ways. to satisfy the provisions of ISO 14042. They reflect the key elements of the life cycle impact…

This National Standard of Canada is equivalent to International Standard ISO/IEC 20161:2001 (first edition, 2001-12-15). 1 Scope This International Standard specifies the combination of base standards, together with the selection of appropriate options and parameter values, necessary to specify how QSIG / PSS1 can be used to provide digital signalling capabilities at interfaces at the C…

This National Standard of Canada is equivalent to International Standard ISO/IEC 21409:2001 (first edition, 2001-08-15). 1 Scope This International Standard specifies signalling interworking between .QSIG. and .H.323. in support of generic functional procedures for supplementary services within a Corporate telecommunication Network (CN). .QSIG. is a signalling protocol that operates at the Q…

This National Standard of Canada is equivalent to International Standard ISO/IEC 21410:2001 (first edition, 2001-08-15). 1 Scope This International Standard specifies signalling interworking between .QSIG. and .H.323. in support of the call transfer supplementary services within a Corporate telecommunication Network (CN). .QSIG. is a signalling protocol that operates at the Q reference point…

This National Standard of Canada is equivalent to International Standard ISO/IEC 21411:2001 (first edition, 2001-08-15). 1 Scope This International Standard specifies signalling interworking between .QSIG. and .H.323. in support of call diversion supplementary services within a Corporate telecommunication Network (CN). .QSIG. is a signalling protocol that operates at the Q reference point…