Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-2-4:2002 (second edition, 2002-06). 1 Scope This part of IEC 61000 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz. It gives numerical compatibility levels for industrial and non-public power distribution systems at nominal voltages up to 35 kV and a nominal frequency of 50…

This is a Tri-national standard with ANCE NMX-J-017 and UL 514B. 1 Scope 1.1 These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CEC), Part I, CSA C22.1, and the Standard for Electrical Installations, NOM-001-SEDE. 1.2 These requirements cover CONDUIT LOCKNUTS,…

1 Scope 1.1 This Standard specifies construction and testing of mine power feeder cables normally used for power distribution in stationary or semi-stationary applications that are covered by CAN/CSA-M421 and the Canadian Electrical Code, Part I. This Standard covers cables with voltage levels of 5, 8, 15, and 25 kV rated at 100% and 133% insulation levels. 1.2 This Standard specifies…

1 Scope 1.1 General 1.1.1 This Standard specifies minimum requirements for and provides guidance on design principles, safety levels, and loads in connection with the design, construction, transportation, installation, and decommissioning of offshore structures. 1.1.2 This Standard is intended to cover all offshore structures and all parts of offshore structures (including the main deck and…

G40.20-04 General requirements for rolled or welded structural quality steel 1 Scope 1.1 This Standard outlines the requirements that apply, unless otherwise specified in a purchase order or individual standard, to structural quality steel plates, shapes, sheet, sheet piling, cold-formed channels, hollow sections, Z sections, and bars conforming to the requirements of CSA G40.21. Tables 11(a)…

1 Scope 1.1 This Standard applies to mineral-insulated cables with copper, nickel-/nickel-alloy-clad copper, steel-clad copper, or nickel conductors, enclosed in a copper or stainless steel sheath. 1.2 The constructions covered by this Standard are intended for use in power, instrumentation, control, and fire alarm systems in accordance with the Canadian Electrical Code, Part I. 1.3 The…

This National Standard of Canada is based on International Standard CEI/IEC 1000-3-6:1996 (first edition, 1996-10). 1 Scope This technical report outlines principles which are intended to be used as the basis for determining the requirements for connecting large distorting loads (producing harmonics and/or interharmonics) to public power systems. The primary objective is to provide guidance…

This National Standard of Canada is based on International Standard CEI/IEC 1000-3-7:1996 (first edition, 1996-10). 1 Scope This technical report outlines principles which are intended to be used as the basis for determining the requirements for connecting large fluctuating loads (producing flicker) to public power systems. The primary objective is to provide guidance for engineering…

1 Scope 1.1 This Standard specifies requirements related to the performance, design, testing, labelling, and provision of instructions for pre-engineered flexible horizontal lifeline systems (FHLSs) for the attachment of personal protective equipment for protection against falls from a height. These systems are used for arresting falls and may be used for work positioning and travel restraint.…

1 Scope 1.1 This Standard is intended for professional engineers with expertise in designing fall-protection systems. It specifies requirements for the design and performance of complete active fall-protection systems, including travel-restraint and vertical and horizontal fall-arrest systems. 1.2 This Standard is not intended as a substitute for testing and certification of individual…