Rechercher

ISO 5356-1:2004 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic-gas scavenging systems and vaporizers. ISO 5356-1:2004 gives requirements for the following conical connectors: 8,5 mm sizes intended for use in paediatric breathing systems;15 mm and 22 mm sizes intended for…

1 Scope 1.1 This Standard applies to lift truck Classes 1, 2, 3, 4, 5, and 7; in addition, certain clauses apply to Class 6 vehicles, non-powered high lift trucks, and personnel and burden carriers. See Annex B for a listing and description of classes. 1.2 The purpose of this Standard is to promote lift truck safety and minimize the risk of injury to workers by specifying the essential elements…

1 Scope 1.1 This Standard applies to flexible metal conduit and liquid-tight flexible metal conduit, trade sizes 12(3/8) to 103(4), excluding 14(7/16), intended for use as a metal raceway for the installation of conductors in accordance with the Canadian Electrical Code, Part I. In addition, this Standard applies to special purpose flexible metal conduit, trade sizes 10(5/16) and 14(7/16),…

1 Scope 1.1 This Standard specifies safety requirements for the design and construction of agricultural front-end loaders (front loaders) designed to be mounted on agricultural wheeled tractors (as defined in CSA M684). The purpose of this Standard is to provide a reasonable degree of personal safety for operators and other persons during normal operation and servicing of agricultural front-…

1 Scope 1.1 This test method determines the wind uplift resistance of mechanically attached membrane-roofing systems subjected to dynamic wind load cycles. The roofing system consists of a deck and roofing membrane. It also includes components such as air/vapour barriers or retarders and insulation. It is subjected to a dynamic load sequence that has been developed based on wind pressure…

1 PURPOSE AND SCOPE This document describe the policy and the rules of procedure used by the Bureau de normalisation du Québec (BNQ) in the development, revision, modification, reaffirmation and withdrawal of consensual documents. NOTE - This policy and these rules of procedure conform to the principles specified in the current edition of Document CAN-P-1, ISO/IEC Guide 59 (see Annex C) as well…

Describes a standardized method for the determination of the average viscometric degree of polymerization (DPv) of new and aged cellulosic electrically insulating materials. It may be applied to all cellulosic insulating materials such as those used in transformer, cable or capacitor manufacturing. The methods described can also be used for the determination of the intrinsic viscosity of…

Cette norme du CSA et commune avec UL 1778. 1.1 Domaine d'application Remplacer cet article du DR par le texte qui suit: 1.1.1 Appareillage visé par cette norme Cette norme s'applique aux ALIMENTATIONS SANS COUPURE. La fonction essentielle d'une alimentation sans coupure, dans le contexte de cette norme, est d'assurer la continuité d'une alimentation électrique…

This National Standard of Canada is equivalent to International Standard IEC 61965:2003. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to CRTs…

1 Scope 1.1 This Standard provides management requirements for facilities that collect, process, store, and use human blood and blood components for transfusion. It addresses issues of safety and efficacy for recipients, and safety for facility personnel and others who are exposed to or potentially affected by blood and blood components. 1.2 This Standard applies to blood centres and…