Rechercher

1 Scope 1.1 This Standard specifies requirements for evaluating adhesives used to bond solid wood materials in structural wood products designed for exterior applications. 1.2 The requirements of this Standard are based on procedures for evaluating the resistance of adhesives to (a) shear caused by compression loading, under both wet and dry conditions; (b) delamination during…

1 Scope 1.1 This Standard specifies kickback performance limits for gasoline-powered chain saws, 80 cm3 (4.88 in3) engine displacement and smaller, Classes 1A, 1B, and 1C, and electric chain saws, Classes 2A and 2C, as defined in CAN/CSA-Z62.1. 1.2 This Standard also specifies kickback limits for saw chains. 1.3 This Standard also specifies kickback marking requirements. 1.4 In CSA…

This National Standard of Canada is equivalent to International Standard ISO 2061:1995. 1. Scope 1.1 This International Standard specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method. 1.2 This International Standard is applicable to: a) single…

1 Scope 1.1 General This Standard provides the requirements for materials and methods of construction for cast-in-place concrete and concrete precast in the field. Notes: (1) Requirements for the design of concrete structures are provided in CSA A23.3 and CAN/CSA-S6. Design of some specialty concrete products is described in separate CSA Standards. (2) Methods of test for concrete are…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15050:2003. 1 Scope This International Standard specifies the signalling protocol for the support of the Advice Of Charge supplementary services (SS-AOC) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (PISN…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15054:2003. 1 Scope This International Standard specifies the signalling protocol for the support of the additional network feature Call Interception (ANF-CINT) at the Q reference point between Private Integrated services Network eXchanges (PINX) connected together within a Private Integrated Services Network (…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15991:2003. 1 Scope This International Standard specifies the Supplementary Services Call Priority Interruption (SS-CPI) and Call Priority Interruption Protection (SS-CPIP), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are specified in ISO/…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15992:2003. 1 Scope This International Standard specifies the signalling protocol for the support of the Call Priority Interruption (SS-CPI) and Call Priority Interruption Protection (SS-CPIP) supplementary services at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected…

This National Standard of Canada is equivalent to International Standard ISO/IEC 17310:2000. 1 Scope This International Standard defines the mapping functions in exchanges of Private Integrated Services Networks (PISNs) required for the utilization of scenarios in which 64 kbit/s circuit mode connections are sub-multiplexed into 4 x 16 kbit/s channels for carrying inter-PINX signalling and…

This National Standard of Canada is equivalent to International Standard ISO/IEC 17311:2000. 1 Scope This International Standard defines the mapping functions in exchanges of Private Integrated Services Networks (PISNs) required for the utilization of scenarios in which 64 kbit/s circuit mode connections are sub-multiplexed into one 16 kbit/s channel for carrying inter-PINX signalling and 6 x 8…