Rechercher

1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable water based agent fire extinguishers. These fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and with the National Fire Code of Canada. 1.2 The requirements for performance during fire testing of water based…

1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable carbon-dioxide fire extinguishers. Carbon-dioxide fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and the National Fire Code of Canada. 1.2 The requirements for performance during fire testing of carbon-…

This National Standard of Canada is joint with ANSI/UL 626. 1 Scope 1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of water fire extinguishers. Water fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10, and the National Fire Code of Canada. 1.2 These…

Preface This is the first edition of AAMA/WDMA/CSA 101/I.S.2/A440-05, Standard/Specification for windows, doors, and unit skylights, jointly published by the American Architectural Manufacturers Association (AAMA), the Window & Door Manufacturers Association (WDMA), and the Canadian Standards Association (CSA). 1 Scope 1.1 General This fenestration Standard/Specification applies to both…

1 Scope 1.1 This Standard applies to the design of aluminum alloy members and assemblies intended to carry a known load. 1.2 This Standard specifies requirements for the design of members to meet the requirements of the National Building Code of Canada using limit states design procedures. 1.3 This Standard contains rules to determine the ultimate resistance of aluminum members and connections…

1 Scope 1.1 The requirements for heating and cooling equipment apply to the following stationary equipment for use in non-hazardous locations rated 7200 V or less, single- or 3-phase, and remote control assemblies for such equipment: (a) heat pumps for heating and cooling with or without factory- or field-installed electric resistance heaters, or hot water or steam heating coils; (b) air…

1 Scope 1.1 This Standard covers material, manufacturing, and class dimensional requirements for seasoned wood poles and reinforcing stubs that are primarily intended for the support of electrical power or communication lines. 1.2 This Standard does not cover requirements for wood poles intended for use in structures such as bridges and buildings. 1.3 This Standard does not cover requirements…

1 Scope 1.1 Purpose The purpose of this Standard is to minimize the risk of personal injury by providing minimum requirements for the design, construction, installation, inspection, and maintenance of the mechanical refrigeration systems specified in Clauses 1.2.1 and 1.2.2. Note: This Standard does not directly address protection of property and preservation of the environment. 1.2…

1 Scope 1.1 This Standard applies to protective headwear for industrial, construction, mining, utility, and forestry workers. It defines the areas of the head that are to be protected and includes basic performance requirements for dielectric strength, impact attenuation, penetration resistance, passive retention (stability), and shell flammability and liner ignition resistance. 1.2 This…

1 Scope 1.1 General This Standard specifies requirements for the performance, design, testing, marking, and instructions of energy absorbers and lanyards, including lineman's pole straps and integrally connected lanyards and energy absorbers. 1.2 Applications Energy absorbers and lanyards are used as parts of complete fall arrest, travel restraint, fall restrict, or work positioning…