Rechercher

Preface This CSA Special Publication, Ontario installation code for oil-burning equipment, includes content from CSA B139-04, Installation code for oil-burning equipment, and CAN/CSA-B139-00, Installation Code for Oil-Burning Equipment, and incorporates changes by the Technical Standards and Safety Authority (TSSA) to make the requirement suitable for adoption in Ontario. 1 Scope 1.1 This Code…

1 Scope 1.1 Objective 1.1.1 This Standard provides minimum requirements and recommendations to protect persons who work in an environment affected by welding, cutting, and allied processes from illness and injury, and to prevent damage to property arising from the installation, operation, and maintenance of equipment used in these processes. 1.1.2 This Standard specifies the elements…

1 Scope 1.1 This Standard applies to electric supply and communication lines and equipment located entirely outside of buildings and fenced supply stations. 1.2 Existing installations, including maintenance replacements, additions, and alterations, meeting the original designs that currently comply with prior editions of this Standard, need not be modified to comply with this edition of…

1 Scope 1.1 This Standard applies to rigid PVC (unplasticized) conduit, elbows, bends, and couplings, intended for use at a continuous operating temperature of 75 °C, for the installation of wires and cables in accordance with the Rules of the Canadian Electrical Code, Part I, for ordinary locations. 1.2 The products covered by this Standard are not threaded and are intended to be joined…

ISO 7886-4:2006 specifies requirements for sterile single-use hypodermic syringes made of plastic materials with or without needle, and intended for the aspiration of fluids or for the injection of fluids immediately after filling and of design such that the syringe can be rendered unusable after use. ISO 7886-4:2006 is not applicable to syringes made of glass (specified in ISO 595), auto-…

1 PURPOSE AND SCOPE This standard specifies the characteristics and test methods for polyethylene (PE) pipe and fittings designed to carry gravity flowing liquids such as surface water evacuation, soil drainage and culverts. This standard applies to single wall semi-rigid or flexible pipes either with annular or spiral corrugations. Pipe diameters range from 100 mm to 900 mm and they can be…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-29:2003. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric battery chargers for household and similar use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. Battery chargers not intended…

1 Scope 1.1 This Standard covers cast iron soil pipe, fittings, and means of joining for installation in gravity-flow plumbing systems inside and outside of buildings, above and below grade. Note: Pipe and fittings that comply with this Standard are not universally compatible with pipe and fittings manufactured in accordance with ASTM A 74 and ASTM A 888. 1.2 In CSA Standards, "…

This National Standard of Canada is equivalent to International Standard ISO 19901-1:2005. 1 Scope This part of ISO 19901 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries. The requirements are divided…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-71:2005. 1 Scope This clause of Part 1 is replaced by the following. This standard deals with the safety of all kinds of electrical heating appliances used for livestock rearing and breeding, such as: heat-radiating appliances, electrical sitting-hens, incubators, chicken breeding units and heating plates…