Rechercher

SCOPE 1.1 The Standards for foam liquid concentrates are divided into three categories. Category 1 Category 2 Category 3 Primarily for use on general-purpose hydrocarbon fires Primarily for use on polar solvents, oxygenated fuels, and water-miscible fuels and all Category 1 applications Primarily for use on aircraft rescue fire fighting and all Category 1 applications This Standard refers to…

1. SCOPE 1.1 The Standards for foam liquid concentrates are divided into three categories. Category 1 Category 2 Category 3 Primarily for use on general-purpose hydrocarbon fires Primarily for use on polar solvents, oxygenated fuels, and water-miscible fuels and all Category 1 applications Primarily for use on aircraft rescue fire fighting and all Category 1 applications This Standard…

1. SCOPE 1.1 The Standards for foam liquid concentrates are divided into three categories. Category 1 Category 2 Category 3 Primarily for use on general-purpose hydrocarbon fires Primarily for use on polar solvents, oxygenated fuels, and water-miscible fuels and all Category 1 applications Primarily for use on aircraft rescue fire fighting and all Category 1 applications This Standard…

Unique identification can occur at many different levels in the supply chain, at the transport unit, at the item level, and elsewhere. Such distinct entities are often handled by several parties: the sender, the receiver, one or more carriers, customs authorities, etc. Each of these parties must be able to identify and trace the item so that reference can be made to associated information such as…

Unique identification can occur at many different levels in the supply chain, at the transport unit, at the item level, and elsewhere. Such distinct entities are often handled by several parties: the sender, the receiver, one or more carriers, customs authorities, etc. Each of these parties must be able to identify and trace the item so that reference can be made to associated information such as…

1 Scope 1.1 General This Standard specifies requirements for coiled aluminum line pipe and accessories primarily intended for use in oil and gas pipeline systems. 1.2 Pipe diameter and wall thickness This Standard specifies requirements for pipe with the outside diameters and wall thicknesses specified in Table 1. 1.3 Terminology In CSA Standards, "shall" is used to express…

1 Scope 1.1 This Standard describes procedures for determining the occupational noise exposure level of workers (Lex,T) using sampling techniques. Lex,T represents the long-term noise exposure of workers and is calculated from measurements of Leq,t in the workplace. Notes: (1) Noise exposure has been expressed as % dose in the past. However, the use of Leq,t is recommended, as it is more…

The International Standard ISO 9712:2005 is adopted without modifications (IDT) as a CGSB Standard CAN/CGSB-48.9712-2006/ISO 9712:2005 and has been approved as a National Standard of Canada by the Standards Council of Canada. 1 Scope This International Standard specifies the qualification and certification of personnel involved in non-destructive testing (NDT). It is applicable to…

1 Scope 1.1 This Standard applies to personal protective apparel intended to provide protection to the torso, arms, and legs, including joints, of correctional officers and law enforcement personnel from blows with blunt objects (e.g., rocks, stones, glass bottles, pipes, baseball bats, wooden planks, etc.)* during riots, inmate control situations, and in any other situation in which there is a…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-5:2002 +A1 :2005. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric dishwashers for household use that are intended for washing and rinsing dishes, cutlery and other utensils, their rated voltage being not more than 250 V for single-phase…