Rechercher

1 Scope 1.1 This Standard applies to systems and equipment used to capture and evacuate plume. It applies to all settings where such systems and equipment are used, including, but not limited to, the following: (a) surgical facilities; (b) dental clinics; (c) medical offices; (d) veterinary facilities; (e) laboratories and other research and testing facilities; (f) cosmetic treatment facilities…

C22.4 No. 1-09 Objective-based industrial electrical code Preface This is the first edition of CSA C22.4 No. 1, Objective-based industrial electrical code. Permission to use extracts from IEC 60364-1:2005 was provided by Standards Council of Canada, in co-operation with IHS Canada. No further reproduction is permitted without prior written approval from Standards Council of Canada. 0…

C22.4 No. 2-09 Objective-based industrial electrical code - Safety management system requirements Preface This is the first edition of CSA C22.4 No. 2, Objective-based industrial electrical code - Safety management system requirements. 0 Object This Standard is intended to be used by an organization to develop an objective-based industrial electrical code (OBIEC) safety management…

Scope 1.1 This Standard specifies the test method for measuring the thermal efficiency of gas-fired swimming pool heaters. 1.2 This Standard applies to newly produced pool heaters (constructed entirely of new parts and materials) for heating, with either natural gas or liquefied petroleum, non-potable water stored at atmospheric pressure. 1.3 This Standard applies to the following pool…

Preface This is the fourth edition of CSA O302.1, Scaling roundwood, which supersedes the previous editions, published in 2000, 1986, and 1977, and the third edition of CSA O302.2, Measurement of wood chips, tree residues, and by-products, which supersedes the previous editions, published in 2000 and 1986 under the title Measurement of Woodchips, Tree Residues, and Byproducts…

Scope 1.1 Except as indicated in Clause 1.2, Part 1 of this Standard applies to all boilers, pressure vessels, pressure piping, and fittings, as provided for by the Act (as defined in Clause 3) and identified in Part 1 of this Standard. Notes: (1) It is possible that the size limitations specified in provincial or territorial statutes or regulations will differ from those specified in Part 1 of…

Scope 1.1 This Standard applies to tanks, other than intermediate bulk containers and tubes, used for the transportation of dangerous goods primarily by road. It considers the design, construction, certification, assembly, modification, repair, testing, inspection and periodic retesting, maintenance, and identification of such tanks. This Standard also applies to the hoses used to load or off-…

Scope 1.1 This Standard details the requirements for the selection and use, handling, filling, and unloading of highway tanks, TC portable tanks, and other large containers when they are used as a primary means of containment for the transportation of dangerous goods of Classes 3, 4, 5, 6.1, 8, and 9. 1.2 This Standard sets out certain minimum requirements for the selection of the appropriate…

Scope 1.1 This Standard details the requirements for the selection and use, handling, filling, and unloading of highway tanks, TC portable tanks, and ton containers used as means of containment for the transportation of dangerous goods of Class 2. 1.2 This Standard sets out certain minimum requirements for the selection of the appropriate means of containment for the transportation of dangerous…

1 Scope 1.1 This Standard specifies requirements for 600-volt-class copper and aluminum conductor secondary and service-entrance cables intended for underground installation (a) by direct burial; or (b) in duct systems. This Standard also applies to multiple-conductor cable assemblies. Note: Portions of the cable covered by this Standard will be exposed to sunlight on terminal poles and during…