Rechercher

1 Scope 1.1 This Standard applies to nonmetallic sheathed cables intended for use on systems having a nominal voltage of 300 V and less, in accordance with the rules of the Canadian Electrical Code, Part I. 1.2 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is…

This National Standard of Canada is based on International Standard ISO 15883-1:2006. 1 Scope This part of ISO 15883 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice…

Scope 1.1 Scope This Standard applies to the erection and use of access scaffold that is (a) supported on a surface; (b) hung from multiple points, but is not capable of moving vertically or horizontally; or (c) mounted on wheels. This Standard addresses key hazards, including fall hazards, structural instability, platform failures, and material handling problems. Note: In this Standard…

PURPOSE AND SCOPE This document describe the policy and the rules of procedure used by the Bureau de normalisation du Québec (BNQ) in the development, revision, modification, reaffirmation and withdrawal of consensual documents. NOTE — This policy and these rules of procedure conform to the principles specified in the current edition of Document CAN-P-1, ISO/IEC Guide 59 (see Annex C) as…

1.1 Scope 1.1.1 This standard applies to newly produced, automatic storage water heaters having input ratings of 75,000 Btu/hr (21 980 W) or less (see Part IV, Definitions), hereinafter referred to as water heaters or appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with manufactured gas; c. For use with mixed gas; d. For use…

Scope 1.1 This Standard applies to single conductor and multi-conductor constructions, without metal sheath or armour, suitable for use in cable trays and other applications when installed in accordance with the Canadian Electrical Code, Part I. 1.2 The test and marking requirements of this Standard are in addition to the basic requirements for cable construction that appear in other published…

Scope 1.1 This Standard applies to Specification TC 44 portable tanks. It specifies requirements for the design and construction of such tanks. Note: The certification, assembly, modification, repair, testing, inspection and periodic retesting, maintenance, and identification of such tanks are covered by CSA B620. Selection and use are covered by CSA B621. 1.2 The Transportation of…

This National Standard of Canada is based on International Standard ISO 19902:2007. Scope This International Standard specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: - caissons, free-standing and braced; - jackets; - monotowers; - towers. In addition, it is applicable…

1 Scope 1.1 This Standard specifies the test method to measure per-cycle energy consumption and the calculations required to determine the energy factor of low power residential gas clothes dryers. 1.2 This Standard applies to compact size and standard size gas clothes dryers for use in residential applications. 1.3 This Standard does not apply to the construction and performance…

Scope 1.1 This Standard applies to the performance, durability, and safety of packaged solar domestic hot water (SDHW) systems that use liquid-to-liquid heat transfer and liquid heat storage media suitable for year-round use. 1.2 This Standard specifies requirements for both factory-packaged and add-on packaged systems. 1.3 This Standard applies to the components and materials…