Rechercher

2.1 This laboratory guide has been developed for the assessment of volatile organic compound emissions from materials used in residential buildings. 2.2 This laboratory guide specifies recommended procedures for the use of test chambers to evaluate emissions from the material at a point in time following its installation. The guide contains the following: A A head-space analysis procedure for…

2.1 Le présent guide de laboratoire a été élaboré aux fins d’évaluation des émissions de composés organiques volatils des matériaux utilisés dans des immeubles d’habitation. 2.2 On y énonce les méthodes recommandées pour l’utilisation de caissons d’essai dans le but d’évaluer les émissions s’échappant du matériau à un moment donné après son installation. Le guide renferme ce qui suit : A L’…

La presente norme nationale du Canada est equivalente a la norme internationale ISO 15883-2:2006. 1 Domaine d'application La présente partie de l'ISO 15883 spécifie les exigences particulières relatives aux laveurs désinfecteurs (LD) destinés à être utilisés pour le nettoyage et la désinfection thermique, au cours d'un seul cycle standard, des dispositifs médicaux réutilisables…

Scope 1.1 This Standard specifies construction and testing requirements for mine power feeder cables normally used for power distribution in stationary or semi-stationary applications covered by CAN/CSA-M421 and the Canadian Electrical Code, Part I. 1.2 This Standard covers cables with voltage levels of 5, 8, 15, and 25 kV, rated at 100% and 133% insulation levels. 1.3 The cable constructions…

1 Scope 1.1 This Standard specifies construction and testing requirements for portable power cables normally used in applications where the cables are subject to frequent flexing and where installation is in accordance with CAN/CSA-M421 and/or the Canadian Electrical Code, Part I. 1.2 The cable constructions specified in Clauses 5 to 9 and Clauses 12 to 15 of this Standard are suitable for use…

Scope 1.1 This Standard applies to the cooling performance of portable air conditioners that have a rated cooling capacity of 19 000 W (65 000 Btu/h) or less and provide cooled air in one of the operating configurations described in Table 1. Note: The air conditioners described in this Clause include air conditioners with heating capability. 1.2 This Standard does not apply to (a) testing and…

Scope 1.1 This Standard specifies energy performance requirements for self-contained vending machines that actively cool or heat, or both, the product to be vended. 1.2 This Standard specifies (a) uniform procedures for measuring energy consumption; and (b) maximum daily energy consumption levels. 1.3 This Standard applies to Types A, B, C, D ,E ,F, and G vending machines, as defined…

Scope 1.1 The purpose of this Standard is to provide a method for measuring annual fireplace efficiency. 1.2 This Standard applies to vented gas fireplaces approved to ANSI Z21.50/CSA 2.22 and to vented gas fireplace heaters approved to ANSI Z21.88/CSA 2.33 that use natural gas or propane. 1.3 This Standard does not apply to decorative fireplaces certified to ANSI Z21.60/CSA 2.26.…

Scope 1.1 This Standard specifies test methods and performance criteria for determining the efficiency of package furnaces. 1.2 This Standard applies to package furnaces using a three-phase power supply with input rates less than or equal to 2930 kW (10 000 000 Btu/h). 1.3 This Standard applies to package furnaces using a single-phase power supply with input rates greater than or…

Scope 1.1 This Standard specifies requirements for the design, construction, initial inspection and testing, marking, periodic inspection and testing, and repair of UN pressure receptacles and multiple-element gas containers (MEGCs) for the transport of dangerous goods. Annex A specifies the regulatory requirements for the conformity assessment system and registration requirements for…