1 Scope
1.1
This Standard specifies test procedures and performance requirements for the efficacy of fluorescent
lamp ballasts for use in fluorescent luminaires to be installed in industrial, commercial, or residential
locations.
1.2
This Standard applies to ballasts intended to operate at a line frequency of 60 Hz.
1.3
This Standard covers ballasts for the types of fluorescent lamp specified in…
1.1
The requirements of this Standard apply to the following electrical equipment for elevators, escalators,
moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities
(platform lifts and stairway chairlifts):
(a) motor controllers;
(b) motion controllers;
(c) operation controllers;
(d) operating devices; and
(e) all other electrical equipment…
Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and win...
1.1
This Standard applies to compact and household refrigerators, refrigerator-freezers, freezers, wine chillers, and hybrid wine chillers that are electrically operated on a 60 Hz alternating current with a nominal supply voltage of 115 V.
1.2
This Standard applies to
(a) refrigerators and refrigerator-freezers with a maximum capacity of 1100 L (39 ft3);
(b) freezers with a maximum capacity of…
Energy efficiency test methods for three-phase variable frequency drive systems
1.1€€
This Standard establishes the testing procedure for determining efficiencies under varying loads and speeds for three-phase output variable frequency drives (VFDs) with rated voltage up to 750 V. This test procedure is limited to a combination of one motor with one drive.
This Standard applies to voltage source inverter (VSI) pulse-width modulated (PWM) drives for squirrel-cage induction…
1 Scope
1.1
This Standard applies to newly produced non-metallic dip tubes intended for use in water heaters.
1.2
Compliance of a dip tube with this Standard does not imply that such dip tube is acceptable for use in
water heaters without supplemental tests with the dip tube installed in the particular water heater
design.
1.3
This standard contains SI (Metric) corresponding to the yard/pound…
Decommissioning of facilities containing nuclear substances
Scope
1.1
This Standard applies to the decommissioning of licensed facilities and other locations where nuclear substances are managed, possessed, or stored.
Notes:
(1) Users are responsible for determining the extent to which this Standard applies to a given facility or location and for
consulting the associated regulatory requirements.
(2) Annexes E, F, and G contain recommended…
1.1 General
This Standard specifies requirements for the structural design of unreinforced, reinforced, and
prefabricated masonry structures and components in accordance with the limit states design method of
the National Building Code of Canada. This Standard also provides requirements for the structural design of
prestressed masonry beams, walls, and columns in accordance with the limit…
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part ...
ISO 10816-8:2014 establishes procedures and guidelines for the measurement and classification of mechanical vibration of reciprocating compressor systems. The vibration values are defined primarily to classify the vibration of the compressor system and to avoid fatigue problems with parts in the reciprocating compressor system, i.e. foundation, compressor, dampers, piping, and auxiliary equipment…
Scope
1.1
This Standard specifies test procedures to determine the performance of general service directional lamps.
Note: This Standard is intended to be technology neutral.
1.2
This Standard does not include requirements for luminaires used with general service lamps and for coloured directional lamps.
Notes:
1) For the purpose of this Standard, general service lamps refer to…
Scope
1.1
This Standard defines minimum energy efficiency and performance requirements for light emitting diode (LED) lamps with an ANSI or IEC standardized base that are designed to connect to a low-voltage or branch circuit via a lampholder. The criteria in this Standard apply to both integral LED lamps of nonstandard form, and to those intended to replace standard general service…
