1.1
This Standard applies to industrial control panels and assemblies rated at not more than 1500 V, intended to be installed and used in non-hazardous locations in accordance with the rules of the Canadian Electrical Code, Part I.
Notes:
1)
Examples of industrial control panels and assemblies covered by this Standard include motor control panels, process control equipment panels, heating…
Sustainability standard for household clothes drying appliances
1.1 This Standard covers clothes drying appliances for households included within the scope of the U.S.
Department of Energy (DoE) and Natural Resources Canada (NRCan) minimum energy performance
requirements. This includes the following product categories:
a) electric clothes dryers; and
b) gas clothes dryers.
NOTE: Presently gas dryers are not a regulated product in Canada for energy…
1.1
This Standard applies to single phase and polyphase dry-type transformers, including those with cast or resin encapsulated coils, that are within the limits of the electrical ratings specified in Clauses 7.2 and 7.3, and that are intended for use in accordance with the service conditions for dry-type transformers specified in Annexes A and B.
Notes:
1)
For information on the loading of…
Medical electrical equipment — Part 2-70: Particular requirements for basic safety and essential per...
IEC 60601-1:2005+A1:2012, 1.1 is replaced by:
This particular standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of SLEEP APNOEA
BREATHING THERAPY EQUIPMENT, hereafter referred to as ME EQUIPMENT, intended to alleviate the symptoms of
PATIENTS who suffer from obstructive sleep apnoea by delivering a therapeutic breathing pressure to the
respiratory tract of the PATIENT.…
Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential per...
IEC 60601-1:2005+A1:2012, 1.1 is replaced by:
This particular standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of oxygen
CONSERVING EQUIPMENT, hereafter referred to as ME EQUIPMENT, in combination with its
ACCESSORIES intended to conserve supplemental oxygen by delivering gas intermittently and
synchronized with the PATIENT'S inspiratory cycle, when used in the HOME…
Manually operated valves for use in plumbing systems
1.1
This Standard specifies requirements for manually operated valves, also known as supply line stops, in sizes NPS 4 and smaller.
1.2
Valves covered by this Standard are intended for
a)
installation as water shutoff valves between the meter and the supply stop; and
b)
service at temperatures between 5 °C (40 °F) and 71 °C (160 °F), with an allowable working pressure rating not less than…
1 Scope
1.1 General
This Standard details mechanical, physical, and electrical requirements for a newly manufactured non- residential appliance, referred to as a vehicle fueling appliance (VFA), that compresses natural gas for vehicles and dispenses directly into onboard vehicle storage or delivers to external natural gas storage systems.
This Standard applies to appliances that incorporate…
Medical electrical equipment — Part 2-40: Particular requirements for the basic safety and essential...
1. Scope
This Standard covers ME EQUIPMENT and ME SYSTEMS that are intended to be installed or used in
accordance with CSA C22.1, Canadian Electrical Code, Part I.
This particular standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of
ELECTROMYOGRAPHS and EVOKED RESPONSE EQUIPMENT, hereafter referred to as ME EQUIPMENT.
NOTE Myofeedback equipment, where the capturing of muscle…
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-0...
1 Scope and object
This clause of Part 1 is applicable, except as follows:
1.1.1 Equipment included in the scope
Replacement:
Replace the first paragraph by the following:
This group safety publication is primarily intended to be used as a product safety standard for
the products mentioned in the scope, but shall also be used by technical committees in the
preparation of their publications…
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-01...
1 Scope and object
This clause of Part 1 is applicable except as follows:
1.1.1 Equipment included in scope
Replacement:
Replace the first paragraph by the following:
This group safety publication is primarily intended to be used as a product safety standard for
the products mentioned in the scope, but shall also be used by technical committees in the
preparation of their publications for…