Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calcula...
ISO 13789:2017 specifies a method and provides conventions for the calculation of the steady‐state transmission and ventilation heat transfer coefficients of whole buildings and parts of buildings. It is applicable both to heat loss (internal temperature higher than external temperature) and to heat gain (internal temperature lower than external temperature). For the purpose of ISO 13789:2017,…
Energy performance of buildings — External climatic conditions — Part 1: Conversion of climatic data...
ISO 52010-1:2017 specifies a calculation procedure for the conversion of climatic data for energy calculations.
The main element in ISO 52010-1:2017 is the calculation of solar irradiance on a surface with arbitrary orientation and tilt. A simple method for conversion of solar irradiance to illuminance is also provided.
The solar irradiance and illuminance on an arbitrary surface are applicable…
Fibre-cement flat sheets — Product specification and test methods
ISO 8336:2017 specifies methods for the inspection and testing of fibre-cement flat sheets and provides the acceptance conditions for their use in one or more of the following applications:
- external wall and ceiling finishes;
- internal wall and ceiling finishes;
- internal and external backing sheets.
Products covered by this document can be used for other purposes, provided…
This standard applies to two types of diesel fuel, Type A and Type B, suitable for use in high-speed diesel engine
powered equipment for on-road and off-road applications and in select equipment powered by medium speed diesel
engines.
Type A is intended for use in selected applications such as urban buses and underground mining or when ambient
temperatures require better low-temperature…
Diesel fuel containing low levels of biodiesel (B1–B5)
This standard applies to two types of diesel fuel, Type A, Bx and Type B, Bx, suitable for use in high-speed diesel
engine powered equipment for on-road and off-road applications and in select equipment powered by medium
speed diesel engines.
Bx represents biodiesel fuel containing x percent by volume of biodiesel component in the range of 1.0 to 5.
Type A, Bx is intended for use in selected…
This standard applies to Type B, Bxx diesel fuel containing from 6% to 20% by volume of biodiesel. Fuel to this
standard is intended for use in high-speed diesel powered equipment for on-road and off-road applications and in
select equipment powered by medium-speed diesel engines.
Users of fuel meeting this standard are advised to refer to the owner’s manual of their vehicle, engine or…
Community paramedicine: Framework for program development
1.1
This Standard provides a framework for the planning, implementation and evaluation of a community paramedicine program, hereinafter referred to as “the program”. The purpose of this Standard is to provide guidance to fully understand the context, key considerations and essential elements for community paramedicine program development. The Standard provides a systematic approach for policy…
1.1
This Standard is arranged in two parts, as follows:
a)
CSA B138.1 covers requirements for manufacturing, testing, marking, and manufacturer’s instructions of portable oil-burning equipment; and
b)
CSA B138.2 covers requirements for installation of portable oil-burning equipment including field installed ancillary equipment required for operation of the portable oil-burning equipment.
1.…
Cellulose nanomaterials — Test methods for characterization
1.1
This Standard describes test methods for characterization of base cellulose nanomaterials, specifically those designated as cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs) and cellulose microfibrils (CMFs).
Note: These designations, particularly CNFs and CMFs, are not used consistently among cellulose nanomaterial producers and users; therefore there is some overlap as to which…
1.1
This Standard provides guidance and a blank detail specification for cellulose nanomaterials (CNMs), for determining and listing essential properties and characteristics with reference to corresponding test methods in CSA Z5100 and other standards. CNMs in this Standard include cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and cellulose microfibrils (CMFs).
1.2
Numeric values…