Rechercher

1 Scope This part of IEC 62660 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). NOTE 1 Secondary lithium-ion cells used for propulsion of plug-in hybrid electric vehicles (PHEV) can be tested by the…

1 Scope 1.1 This Standard provides requirements and guidance on the structural design of new wastewater treatment plants, including buildings and liquid-containing tanks, from the point effluent enters the plant to the point of its discharge. 1.2 This Standard is written in support of the design process provided by the National Building Code of Canada, but includes additional requirements…

1 Scope 1.1 This Standard provides requirements and guidance for a consistent approach on how to plan and conduct a study to evaluate different HCF design features while ensuring that the resources required and level of rigour match the undertaking. Note: The focus of these studies should be aligned with the objectives of the funding agency or study sponsor to address HCF planning or design…

1 Scope This document describes the test methods for characteristics of identification cards according to ISO/IEC 7810 and other standards, such as those listed in the Introduction. NOTE 1 Criteria for acceptability do not form part of this document but are found in other International Standards including those mentioned in the introduction. NOTE 2 Test methods described in this document are…

Scope Replacement: This document applies to the basic safety and essential performance of a ventilator in combination with its accessories, hereafter referred to as ME equipment: ? intended for use in an environment that provides specialized care for patients whose conditions can be life-threatening and who can require comprehensive care and constant monitoring in a professional healthcare…

1 Scope 1.1 Applicability This Standard applies to the design, installation, inspection, repair, and maintenance of the fuel storage and delivery system used as a provision for motive power. This Standard specifically addresses a) On-road vehicles (highway vehicles); b) Off- road vehicles (mining and construction); and c) Powered industrial trucks (forklifts and TUGs). Note: This…

This document defines the Forward Space Packet (FSP) service in conformance with the transfer services specified in reference [1], Cross Support Reference Model―Part 1: SLE Services. The FSP service is a Space Link Extension (SLE) transfer service that enables a mission to send Space Packets to a spacecraft in sequence-controlled or expedited mode. This document defines, in an abstract manner,…

This document collects available data on combined chemical resistance of thermoplastic materials typically used to manufacture piping components for industrial applications, against fluids over a range of temperatures. The base thermoplastic materials covered by this classification are: Polyethylene                                                              PE NOTE 1        The PE considered in…

1.1  This document provides general utilization requirements and recommendations and calculation methods adequate to guarantee the effectiveness and ultimate strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft during flight, including the following: a) cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves…

This document specifies the requirements and test methods for mechanical fittings intended to join plastic pressure piping systems including transition fittings to metal pipes for the following: —    supply of gaseous fuels (GAS); —    supply of water for human consumption (W), including raw water prior to treatment and for the supply of water for general purposes, as well as underground drainage…