Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-4-6: 1996 (first edition, 1996-03). This section of International Standard IEC 1000-4 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz.…

This standard is divided into five sections, each dealing with a specific example of standardized fuse for use by authorized persons: Section I: Fuses with fuse-links with blade contacts. Section II: Fuses with fuse-links for bolted connections. Section III: Fuses with fuse-links having cylindrical contact caps. Section IV: Fuses with fuse-links with offset blade contacts. Section V: Fuses with…

This National Standard of Canada is based on International Standard CEI/IEC 71-1:1993 1 Scope This part of International Standard IEC 71 applies to three-phase a.c. systems having a highest voltage for equipment above 1 kV. It specifies the procedure for the selection of the standard withstand voltages for the phase-to-earth, phase-to-phase and longitudinal insulation of the equipment…

Purpose of Standard This National Standard of Canada has been reviewed and adopted for Canadian use by the CGSB Committee on Metrology - Terminology and OIML. It is identical in content and in layout, without editorial changes, with the ISO document, International vocabulary of basic and general terms in metrology, published in 1993.

Preface This is the first edition of CSA Special Publication PLUS 9014, ISO 9000 Interpretations. It is a compendium of interpretations given on the ISO 9000 family of Standards and approved by the CSA Technical Committee on Quality Management (TC on QM). The ISO 9000 family of Standards was developed by quality experts from around the world, under the auspices of the Internationa l…

This standard is divided into five sections, each dealing with a specific example of standardized fuse for use by authorized persons: Section I: Fuses with fuse-links with blade contacts. Section II: Fuses with fuse-links for bolted connections. Section III: Fuses with fuse-links having cylindrical contact caps. Section IV: Fuses with fuse-links with offset blade contacts. Section V: Fuses…

Preface This is the first edition of CSA Special Publication PLUS 9015, Interpretations - CSA Sustainable Forestry Management Standards CAN/CSA-Z808-96 and CAN/CSA-Z809-96. It is a collection of interpretations developed by the CSA Technical Committee on Sustainable Forest Management. CAN/CSA-Z808-96, A Sustainable Forest Management System: Guidance Document, and CAN/CSA-Z809-96, A…

This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-2-1:1990. 1 Scope This section of IEC 1000-2 is concerned with conducted disturbances in the frequency range up to 10 kHz with an extension for mains signalling systems. Separate sections give numerical compatibility levels for different system voltage levels. This section does not deal with the application…

This National Standard of Canada is based on International Standard CEI/IEC 1000-2-2:1990. 1 Scope This section of IEC 1000-2 is concerned with conducted disturbances in the frequency range up to 10 kHz with an extension for mains signalling systems. This section gives numerical compatibility levels for low voltage a.c. distribution systems with a nominal voltage up to 347 V, single-…

Introduction - The Purpose of This Workbook The Publication CAN/CSA-Q830, A Model Code for the Protection of Personal Information, referred to as the CSA Code, (a) provides the principles for the management of personal information; (b) specifies the minimum requirements for the adequate protection of personal information held by participating organizations; (c) makes the Canadian…