Rechercher

This National Standard of Canada applies to glazing materials that have been subjected to the test methods described herein. Such test methods are intended to demonstrate minimum performance characteristics designed to reduce the likelihood of cutting and piercing injuries resulting when glazing materials used in areas of human impact (see Annex A) in building and architectural applications…

1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include up to eight pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I, the National…

IEC 60335-2-53:2011+A1:2017 deals with the safety of electric sauna heating appliances and infrared emitting units having a rated power input not exceeding 20 kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The appliances covered by this standard are intended for use in the home and in public saunas located in blocks of flats, hotels…

ISO 18400-101:2017 specifies the procedural elements to be taken in the preparation and application of a sampling plan. The sampling plan describes among other things what laboratory samples are to be taken, how they are to be taken and from where they are to be taken, in order that the objectives of the investigation programme can be achieved. The principles or basic rules outlined in this…

IEC TS 62720:2017(E) specifies identifiers for units to support computer-based processing of product data. It provides a survey of quantities with associated collections of internationally standardized as well as non–standardized units used in business and science. It covers any standard or non-standard units of measure currently in use, in two or more distinct ethno-linguistic groups or nations…

1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable halocarbon clean agent fire extinguishers. Halocarbon clean agent fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and with the National Fire Code of Canada. 1.2 The requirements for performance during…

1.1 Ces exigences visent la construction et le fonctionnement des extincteurs portatifs aux agents propres à l’halocarbure. Elles ne visent toutefois pas le fonctionnement au cours des essais de réaction au feu. Les extincteurs aux agents propres à l’halocarbure sont destinés à être utilisés conformément à la Standard for Portable Fire Extinguishers, NFPA 10 et au Code national de prévention…

1.1 This Standard applies to newly produced vented gas-fired space heating appliances (see Clause 3, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu/hr (117 228 W). These appliances are for use with: a) natural gas; b) manufactured gas; c) mixed gas; d) propane gas […

This part of IEC 60947 specifies requirements for terminal blocks with screw-type or screw-less-type clamping units primarily intended for industrial or similar use and to be fixed to a support to provide electrical and mechanical connection between copper conductors. It applies to terminal blocks intended to connect round copper conductors, with or without special preparation, having a cross-…

This part of IEC 60947 specifies requirements for protective conductor terminal blocks with PE function up to 120 mm2 (250 kcmil) and for protective conductor terminal blocks with PEN function equal to and above 10 mm2 (AWG 8) with screw-type or screwless-type clamping units, primarily intended for industrial applications. NOTE: AWG is the abbreviation of “American Wire Gage” [Gage (US) = Gauge (…