Rechercher

Within the general scope described in ISO/IEC 9995-1, ISO 9995-9:2016 defines the allocation on a keyboard of a set of graphic characters which, when used in combination with an existing national version keyboard layout, allows the input of a minimum character repertoire as defined herein. This repertoire is intended to address all characters needed to write all contemporary languages using the…

1.1 General This Standard specifies requirements for the materials, design, construction, testing, and performance of building guards. This Standard applies to building guards required as protective barriers to prevent accidental falls from one level to another. Notes: 1) This includes walls acting as guards. 2) Guards can be with or without openings, around openings in floors, or at the…

1.1 This Standard applies to newly produced type 2 clothes dryers (see Clause 3) hereinafter referred to as dryers, constructed entirely of new, unused parts and materials for use with: a) natural gas; b) manufactured gas; c) mixed gas; d) propane gas; and e) LP gas-air mixtures. The construction of dryers for use with the above-mentioned gases is covered in Clause 4. The performance of…

ISO 15618-1:2016 specifies essential requirements, ranges of qualification, test conditions, acceptance requirements and certification for the qualification testing of welder-diver performance. ISO 15618-1:2016 is applicable for hyperbaric wet welding on steel. The recommended format for the certificate of qualification testing is given in Annex A. During the qualification test, the welder-diver…

IWA 24:2016 specifies technical requirements, test methods, and sustainability considerations for non-sewered sanitation systems. A non-sewered sanitation system, for the purposes of this document, is a sanitation system that 1) is not connected to a networked sewer system and 2) collects, conveys, and fully treats the specific input, to allow for safe reuse or disposal of the generated output.…

1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable water based agent fire extinguishers. These fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and with the National Fire Code of Canada. 1.2 The requirements for performance during fire testing of water…

1.1 Ces exigences visent la construction et le fonctionnement des extincteurs portatifs à agent à base d’eau. Elles ne visent toutefois pas le fonctionnement au cours des essais de réaction au feu. Ces extincteurs sont destinés à être utilisés conformément à la norme Standard for Portable Fire Extinguishers, NFPA 10 et au Code national de prévention des incendies du Canada. 1.2 Les exigences…

ISO 19008:2016 describes the standard cost coding system (SCCS) that classifies costs and quantities related to exploration, development, operation and removal of oil and gas production and processing facilities and to the petroleum, petrochemical and natural gas industry. Upstream, midstream, downstream and petrochemical business categories are included. The SCCS for coding of costs is…

1.1 These requirements cover lining systems for new masonry chimneys. 1.2 Liners are for use with gas, liquid and solid fuel fired residential appliances and building heating equipment, where the flue gas temperatures normally do not exceed 650 °C. They are intended for use in accordance with the National Building Code of Canada, CSA B139 – Installation Code for Oil Burning Equipment, CSA…

1.1 This Standard sets forth minimum requirements for emergency breakaway fittings intended only for flammable and combustible liquid service. 1.2 An emergency breakaway fitting is intended for use with dispensing devices to allow separation of the hose nozzle valve and/or hose from the dispenser and prevent loss of liquid in the event that the vehicle drives away before the hose nozzle valve is…