Rechercher

1 SCOPE 1.1 The purpose of the test is to evaluate the temperature transmission performance of a protective covering over foamed plastic when the assembly is subjected to a standard fire exposure condition following the Standard Time-Temperature Curve as described in Section 5, Test Conditions. NOTE: In the National Building Code of Canada, these protective coverings are commonly referred as…

1 SCOPE 1.1 This test method is applicable to materials employed in light diffusers and lenses. 1.2 The testing procedure described in this Standard is intended to assess the propensity of material employed in light diffusers and lenses to fall from its installed position before igniting when subjected to test fire exposure conditions in CAN/ULC-S102, Standard Method of Test for Surface…

1 SCOPE 1.1 This Standard covers the minimum requirements for nonmetallic or composite primary tanks, secondary tanks, and open or closed secondary containments from 227 to 2500 L (60 to 660 US gal) primary tank capacity intended primarily for the storage and supply of heating fuel for oil burning equipment, or alternately for the storage of diesel fuels for compression ignition engines and…

Le présent document spécifie une série de méthodes permettant de déterminer l'aptitude d'un ruban adhésif sensible à la pression à rester collé sous l'effet d'une charge constante appliquée parallèlement aux surfaces du ruban et du support. Le présent document contient: — méthode A: Rubans auto-adhésifs ? Mesure de la résistance au cisaillement statique sur une plaque…

This document specifies a series of methods for the determination of the ability of a pressure sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate. This document contains: — method A: Self adhesive tapes ? Measurement of shear adhesion to a vertical standard steel panel; — method B: Self adhesive tapes ? Measurement…

This document provides a list of all ISO geometrical product specification (GPS) and technical product documentation (TPD) standards for technical product specifications (TPS) in the mechanical engineering field. The document operates as an index to the many ISO standards applicable to a TPS by means of cross-reference, and, where appropriate, the subject references are supplemented by commentary…

ISO/TR 27918:2018 is designed to be an information resource for the potential future development of a standard for overall risk management for CCS projects. The risks associated with any one stage of the CCS process (capture, transportation, or storage) are assumed to be covered by specific standard(s) within ISO/TC 265 and other national and/or international standards. For example, the risks…

ISO 23041:2018 establishes standards, current guidelines and uniform procedures to minimize duplication of effort between the customer, the agency, participating nations and the emerging commercial space community. This document provides recommended practices for the development of space operations and support documentation, which should facilitate the sharing and exchange of beneficial…

1 Scope 1.1 This Standard applies to single-polarity connectors for use with all alloys of copper or aluminum, or copper-clad aluminum conductors, or all three, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of America, or the Standard for Electrical…

1 Scope 1.1 This Standard applies to the design, installation, inspection, repair, and maintenance of a fuel storage and delivery system installed in an on road vehicle for use with compressed natural gas (CNG). This includes a fuel system on a self-propelled vehicle for the provision of motive power. Note: This Standard is intended to cover the fuel storage and delivery system as defined in…