Rechercher

1.1 This Standard covers construction and performance requirements for the tank accessories identified in Clause 1.2, for use on atmospheric aboveground tanks not exceeding 19,927 L (5,000 U.S. gal) which are intended for the storage and supply of heating fuels for oil burning equipment, diesel fuels for compression ignition engines, motor oils (new or used) for automotive service stations,…

1.1 La présente norme traite des exigences de construction et de performance des accessoires de réservoirs indiqués à l’article 1.2, prévus pour une utilisation sur des réservoirs sous pression atmosphérique hors sol d’une capacité maximale de 19 927 l (5 000 gal US) destinés au stockage et à l’approvisionnement de mazouts de chauffage pour appareils de combustion au mazout, de carburants…

IEC 63093-4:2019 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of RM-cores and low-profile RM-cores made of ferrite, and the locations of their terminal pins on a 2,54 mm printed wiring grid in relation to the base outlines of the cores. It also gives guidance on allowable limits of surface irregularities applicable to RM-cores in…

1 Scope This National Standard of Canada applies to two types of petroleum distillates intended for use in applications as described below. Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CAN/CSA-B140.9.3, when used in well-ventilated surroundings, and in wick-fed illuminating lamps. Type No. 2-K Kerosene is intended for use in flue-connected stoves and…

1 Scope This National Standard of Canada applies to two types of petroleum distillates intended for use in applications as described below. Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CAN/CSA-B140.9.3, when used in well-ventilated surroundings, and in wick-fed illuminating lamps. Type No. 2-K Kerosene is intended for use in flue-connected stoves and…

1 Scope 1.1 This Standard specifies the requirements for low-halogen aboveground (Type AG) reinforced thermosetting resin conduit (RTRC) and fittings for installation and use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I, NFPA 70, National Electrical Code (NEC) and NOM-001-SEDE, Standard for Electrical Installations (Mexico), in non-hazardous locations. 1.2 The…

1 Scope 1.1 This Standard applies to corrugated electrical nonmetallic tubing (ENT) and mechanically-attached fittings, for use in accordance with C22.1, Canadian Electrical Code, Part I (CE Code), NFPA 70, National Electrical Code (NEC) and NOM-001-SEDE, Standard for Electrical Installations (Mexico). These requirements also apply to mechanically-attached fittings integral with an outlet box…

1 Scope 1.1 This Code specifies minimum requirements for the installation of large oil-burning equipment. Note: The intent of this Code is to apply to multi-unit residential, commercial, institutional, and industrial buildings in accordance with the provincial building code or, in the absence of such regulation, the National Building Code of Canada. 1.2 This Code applies to the…

1 Scope 1.1 The requirements of this Standard apply to the following electrical equipment for elevators, escalators, moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities (platform lifts and stairway chairlifts): a) motor controllers; b) motion controllers; c) operation controllers; d) operating devices; and e) all other electrical…

This document specifies a test method for ensuring the traceability of bulk density, called "mass per hectolitre", measuring instruments through reference to standard measurement instruments. The mass per hectolitre is of commercial importance for grain cereals. Several types of instruments with varying performances exist for measuring it. This document also specifies the performances…