Packing for Transportation of Dangerous Goods in United Nations Performance
Packagings
1. Scope
1.1 This standard sets out the requirements for packing for transport of
dangerous goods in packagings conforming to performance standards
established by the United Nations Committee of Experts on the Transport
of Dangerous Goods and Transport Canada. It does not cover dangerous
goods classed as explosives (Class 1), gases (Class 2), infectious…
Documentation — ISO bibliographic filing rules (International Standard Bibliographic Filing Rules) —...
The ISO bibliographic filing rules are an implementation of ISO 7154, reflecting the filing practices of a substantial number of national filing rules. Selects from ISO 7154 the principles that apply to a four-level hierarchy consisting of (from highest to lowest) - filing entry; - filing area; - filing section; - filing character.
Divides non-assembled strips into three quality grades that are identified by (+++), (++), (+) corresponding to the conditions specified in the tables. Designation or names for these quality grades may be assigned in national standards, provided that such standard indicate, at least in a note, the relationship with the ISO classification. Replaces Recommendation ISO/R 1324-1970 of which it…
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for ...
Specifies requirements, but does not apply to the mentioned product with an aromatic content higher than 30 % and liquids polluted by petroleum traces. Other requirements shall be specified in national standards. Iron, steel, copper, plastics are included as pipeline materials. Not included are joint rings made of cellular rubbers. 2 tables with general and optional requirements.
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material
Specification refers to operating temperatures up to 50 °C. Other requirements, particularly functional tests for the actual sealing materials, shall be specified in national standards. Applicable to joint rings for all pipeline materials including iron, steel, copper, plastics. The standard does not include joint rings made from cellular rubbers or with enclosed voids. 2 tables with general and…
Preferred Voltage Levels for AC Systems, 0 to 50 000 V
1. Scope
1.1 This Standard establishes voltage standards for AC Systems in Canada to provide a guide:
(a) To national committees on utilization and control equipment or devices for establishing standard ratings of such equipment or devices on a basis coordinated with standard systems;
(b) To system designers so that new systems will be designed to accommodate standard ratings of…
Guidelines for corrective action to be taken by a certification body in the event of misuse of its m...
The purpose of this Guide is to identify a series of procedures which a national certification body (non-governmental) should consider in deciding how to respond to a reported misuse of its registered mark of conformity (i.e. violation of a contract, inadequate quality control, or error in assessment of conformity) or a situation in which a certified product is subsequently found to be hazardous…
General rules for a model third-party certification system for products
The rules are valid for the following type of certification system: a third party certification system of determining conformity with product standards through initial testing and assessment of a factory quality management system and its acceptance followed by surveillance (corresponds to system No. 5 as described in ISO/ITC publication "Certification - Principles and practice"). A…
1. Scope
1.1 This Standard covers decorative and industrial plywood made primarily with hardwood veneer faces. It also includes decorative plywood made with certain softwood veneer faces.
1.2 This Standard provides minimum requirements in terms of construction, sizes, grades, sanding, and glue bond.
1.3 This Standard also applies to hardwood plywood wall panelling in all…
