Rechercher

This National Standard of Canada is equivalent to International Standard ISO 8613-1:1989. The purpose of ISO 8613 is to facilitate the interchange of documents. This part of ISO 8613 - introduces ISO 8613 as a whole; - gives the references necessary for all the parts; - defines terms used in the context of ISO 8613; - presents the concepts of the document architecture; - gives an…

This National Standard of Canada is based on International Standard IEc 950:1986. It applies to: (a) Power supplies that are primarily to be used in equipment which itself is to be used in accordance with the Canadian Electrical Code; (b) Power supplies with: (i) rated input voltage not exceeding 750 V rms or dc; (ii) rated input not exceeding 200 kV·A; (iii…

1. SCOPE 1.1 These requirements are for use in the regulation of agencies servicing portable fire extinguishers. 1.2 This Standard is intended to assist in the implementation of the requirements of the National Fire Code of Canada, NFPA 10, or other Standards referenced by the authority having jurisdiction. 1.3 These requirements are not applicable to the activity of filling or…

This National Standard of Canada is equivalent to International Standard ISO 9074-1989. It defines the semantics and syntax of the Formal Description Technique Estelle. Estelle is in general used for the formal description of distributed, concurrent information processing systems. In particular Estelle can be used formally to describe the service definitions and protocol specifications…

This National Standard of Canada is equivalent to International Standard ISO 105-A02:1987. It describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared.

This National Standard of Canada is equivalent to International Standard ISo 105-B01:1988. 1.1 This part of ISO 105 specifies a method intended for determining the resistance of the colour of textiles of all kinds and in all forms to the action of daylight. 1.2 If there is a possiblity of the sample being photochromic, then the test for photochromism shall be applied additionally (see…

This National Standard of Canada is equivalent to International Standard ISO 105-B02:1988. 1.1 This part of ISO 105 specifies a method intended for determining tCh[Ce resistance of the colour of textiles of all kinds and in all forms to the action of an artificial light source representative of natural daylight (D65). The method is also applicable to white (bleached or optically…

This National Standard of Canada is equivalent to International Standard ISO 105-A03:1987. It describes the grey scale for determining staining of adjacent fabrics in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared.

This National Standard of Canada is based on International Standard IEc 300:1984. It outlines guidelines for the selection and implementation of reliability and maintainability activities, appropriate to each of the defined phases of the life of industrial and commercial products in all technologies.

This National Standard of Canada is equivalent to American National Standards Institute (ANSI) standard T1.601-1988. The scope of this standard is as follows: (1) It describes the transmission technique used to support full-duplex service on a single twisted-wire pair (2) It specifies both the input signal with which the NT must operate and the output signal that the NT must produce (3…