Rechercher

Scope This National Standard of Canada determines the flame spread properties of a textile product when a specimen is supported at an angle of 45° and a flame is applied to its surface for 1 s. It also describes the dry cleaning and laundering procedures for removing non-permanent flame-retardant treatments applied to textile products. The testing and evaluation of a product against this method…

1 Scope This document gives the safety requirements and measures for stationary and displaceable combined woodworking machines, having at least two separately usable working units and with manual loading and unloading of the workpiece, hereinafter referred to as “machines”. The integrated working units can be of these types only: — a sawing unit; — a moulding unit; — a planing unit. The…

1 Scope This document gives the safety requirements and measures for stationary multi-blade rip sawing machines manually loaded and/or unloaded, hereinafter referred to as “machines”, designed to cut solid wood and material with similar physical characteristics to wood. It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when…

1 Scope 1.1 General This Standard details mechanical, physical, and electrical requirements for a newly manufactured appliance that compresses natural gas for vehicles and dispenses directly into a) the vehicle natural gas fuel storage system, referred to as a residential fuelling appliance (RFA); or b) the vehicle’s activated carbon adsorbents-based adsorbed natural gas (ANG) fuel storage…

1 Scope 1.1 General This Standard details mechanical, physical, and electrical requirements for a newly manufactured appliance that compresses natural gas for vehicles and dispenses directly into a) the vehicle natural gas fuel storage system, referred to as a vehicle fuelling appliance (VFA); or b) the vehicle’s activated carbon adsorbents-based adsorbed natural gas (ANG) fuel storage…

1 Scope This document specifies a uniform representation of human sexes for the interchange of information. It is intended to: — reduce the time required to record and/or format the representation of sexes and transmit the corresponding data; — improve clarity and accuracy of interchange; — minimize the amount of human intervention required for communicating the representation of sexes; and…

This document provides guidance for —    the sampling process of the aerosol particles in the air using filter media. This document takes into account the specific behaviour of aerosol particles in ambient air (Annex B). —    Two methods for sampling procedures with subsequent or simultaneous measurement: —    the determination of the activity concentration of radionuclides bound to aerosol…

ISO 10303-242 specifies the application protocol for Managed model based 3d engineering. The following are within the scope of ISO 10303-242: products of automotive, aerospace and other mechanical manufacturers and of their suppliers, including parts, assemblies of parts, tools, assemblies of tools, and raw materials; engineering and product data for the purpose of long-term archiving and…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR CONDITIONERS, and DEHUMIDIFIERS incorporating motor-compressors and HYDRONIC FAN COILS UNITS, their maximum RATED VOLTAGES being not more than 250 V for single phase appliances and 600 V for all other appliances. PARTIAL…

IEC 60721-2-6:2022 deals with environmental conditions appearing in nature related to earthquake vibrations and shocks. Its object is to define some fundamental properties and quantities for characterization of earthquakes as background material for the severities to which products are liable to be exposed during storage and use. The accelerations given are for ground surface conditions only.…