Rechercher

This National Standard of Canada applies to the design, colours, and performance of the National flag of Canada intended for one-event-only use. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use. Anyone using this…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric dishwashers for household and similar purposes that are intended for washing and rinsing dishes, cutlery and other utensils, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances intended for normal household…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of microwave ovens for household and similar use, their rated voltage being not more than 250 V. This standard also deals with combination microwave ovens, for which Annex AA is applicable. This standard also deals with microwave ovens intended to be used on board ships, for which Annex…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow, clothes dryers intended for drying footwear or gloves and to electric towel rails, for household and similar purposes, their rated voltage being not more than 250 V. NOTE 101 The clothes racks can be fixed…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric stationary circulation pumps for household and similar purposes intended for use in heating systems or in service water systems, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 The hydraulic and…

IEC 60384-14:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60384-14:2023 edition 5.0 and the previous IEC 60384-14:2013+AMD1:2016 CSV edition 4.1. Furthermore, comments from IEC TC 40 experts are provided to explain the reasons of the most relevant changes, or to clarify…

This document describes the consensus standardization process established by the Bureau de normalisation du Québec (BNQ) to meet the accreditation requirements of the standards development organizations of the Standards Council of Canada (SCC). This process is based on the requirements and guidelines set out in the document Canadian Standards Development — Requirements & Guidance —…

This document specifies the Saunderson correction for different measurement geometries and the solutions of the Kubelka-Munk equation for hiding and transparent layers. It also specifies methods for the calculations of the tinting strength including the residual colour difference based on different criteria such as the depth of shade. Finally, methods for determining the hiding power are provided…

Classes A1a and B1a porcelain (as defined in ISO 13006) are now manufactured in much larger formats than previously available and are increasingly being used as an external cladding material for buildings. Classes A1b, A11a, and AIIb extruded ceramics (as defined in ISO 13006) are not covered by the scope of this document. These materials, when specifically developed for external façade…

Scope This National Standard of Canada assesses the combustion resistance of mattresses when in contact with a lighted cigarette. This standard covers the resistance of mattresses to ignition only by a burning cigarette and does not relate to their resistance to any other source of ignition or fire conditions. The testing and evaluation of a product against this standard may require the use of…