Rechercher

ISO 16670:2003 is intended to provide a cyclic test method as a basis for the derivation of parameters which are required in seismic design of timber structures. The method includes procedures to develop the envelope curves (backbone or skeleton curves, an example is given in Clause A.5.) for joints subjected to a cyclic displacement schedule which produces representative demands imposed on the…

ISO 10303-214:2003 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange of information between the applications that support the development process of the mechanical aspects of automotive vehicles. The following are within the scope of ISO 10303-214:2003: products of automotive manufacturers and of their suppliers. These products…

This National Standard of Canada is based on Draft International Standard ISO/DIS 11193:2000. 1 Scope This National Standard specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended…

This National Standard of Canada is equivalent to International Standard ISO 13485:2003 (second edition, 2003-07-15). 1.1 General This International Standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements…

This National Standard of Canada is a joint Standard with UL 60950-21. It is based on International Standard IEC 60950-21 (first edition, 2002). 1 Scope This part of IEC 60950 applies to information technology equipment intended to supply and receive operating power via a TELECOMMUNICATION NETWORK, where the voltage exceeds the limits for TNV CIRCUITS.

This CSA Standard is a common standard with UL 486A-486B, first edition, and NMX-J-543-ANCE-03, first edition. 1 Scope 1.1 This Standard applies to connectors for use with all alloys of copper or aluminum conductors, or both, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in…

This CSA Standard is a common Standard with UL 83, thirteenth edition, and NMX-J-010-ANCE-2003, third edition. 1 Scope 1.1 This Standard specifies the requirements for 600 V, single-conductor, thermoplastic-insulated wires and cables, for use as follows: a) in Canada, in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I; b) in Mexico, in accordance with NOM-001-SEDE,…

This National Standard of canada is based on International Standard CEI/IEC 1089:1991 (first edition, 1991-05). 1 Scope [Replace this clause with the following] 1.1 This Standard specifies the electrical and mechanical characteristics of round wire concentric lay overhead electrical stranded conductors made of combinations of any of the following metal wires: (a) aluminum wires: (i)…

1.1 Scope 1.1.1 This standard applies to automatically operating gas-fired central furnaces (see Part XI, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for Direct Vent, Recreational Vehicle, Outdoor, and Manufactured (Mobile) Homes. These furnaces may include a cooling unit. All units shall be…

1. SCOPE 1.1 These requirements cover external corrosion protection systems on carbon steel underground storage tanks. The requirements are as follows: A Part 1 covers external corrosion protection using sacrificial anodes, electrical isolation and thin film dielectric coating (cathodic protected tank); B Part 2 covers external corrosion protection using dielectric fibre reinforced…