Ships and marine technology — Computer applications — General principles for the development and use...
ISO 17894:2005 provides a set of mandatory principles, recommended criteria and associated guidance for the development and use of dependable marine programmable electronic systems for shipboard use. It applies to any shipboard equipment containing programmable elements which may affect the safe or efficient operation of the ship. It contains information for all parties involved in the…
Textile Test Methods: Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force Us...
This National Standard of Canada is equivalent to International Standard ISO 13937-1:2000.
1. Scope
This part of EN ISO 13937 describes a method known as the ballistic pendulum (Elmendorf) method for the determination of tear force of textile fabrics. The method describes the measurement of the tear force required to propagate a single-rip tear of defined length from a cut in a fabric when…
Electromagnetic Compatibility (EMC) - Part 4-11: Testing and Measurement Techniques - Voltage Dips, ...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-11:2004.
1 Scope
This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations.
This standard applies to electrical and…
Scope
1.1.1 This standard applies to newly produced household cooking gas appliances (see Part IV, Definitions), hereinafter referred to as units or appliances, constructed entirely of new,
unused parts and materials. These appliances may be floor supported or built-in.
1.1.2 This standard applies to household cooking gas appliances:
a. For use with natural gas;
b. For use with manufactured…
This National Standard of Canada is based on International Standard ISO 15190:2003.
1 Scope
This International Standard specifies requirements for safe practices in the medical laboratory.
Household and Similar Electrical Appliances - Safety - Part 2-31: Particular Requirements for Range ...
This National Standard of Canada is based on International Standard IEC 60335-2-31:2002.
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric range hoods intended for installing above household cooking ranges, hobs and similar cooking appliances, their rated voltage being not more than 250 V.
NOTE 101 The cooking appliance…
Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electr...
This National Standard of Canada is based on International Standard IEC 60335-2-76:2002.
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, feral animal control and security fences may be electrified…
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete V...
This National Standard of Canada is equivalent to International Standard IEC 60745-2-12; and is joint with UL 60745-2-12.
1 Scope This clause of Part 1 is applicable except as follows:
1.1 Addition: This standard applies to concrete vibrators.
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping ...
This National Standard of Canada is equivalent to International Standard IEC 60745-2-18:2003, and is joint with UL 60745-2-18.
1 Scope
This clause of Part 1 is applicable, except as follows:
1.1 Addition: This standard applies to strapping tools.
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular Requirements for Band Saws
This National Standard of Canada is equivalent to International Standard IEC 60745-2-20:2003, and is joint with UL 60745-2-20.
1 Scope
This clause of Part 1 is applicable, except as follows:
1.1 Addition: This standard applies to band saws.