Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC 14496-15:2004. 1 Scope This part of ISO/IEC 14496 specifies the storage format for AVC (ISO/IEC 14496-10 | ITU-T Rec. H.264) video streams. The storage of AVC content uses the existing capabilities of the ISO Base Media File Format but also defines extensions to support the following features of the AVC codec: -…

1.1 Scope Replace this clause of the RD with the following: 1.1.1 Equipment covered by this Standard This Standard applies to UNINTERRUPTIBLE POWER SYSTEMS (UPS). The primary function of the UPS for this Standard is to ensure continuity of an alternating power source. The UNINTERRUPTIBLE POWER SYSTEM may also serve to improve the quality of the power source by keeping it within specified…

1 Scope 1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of the Canadian Electrical Code, Part I (…

1 Scope 1.1 Products covered 1.1.1 This standard applies to motor control centres to be used in accordance with the U.S. National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code, Part I, CSA C22.1, and the Mexican Electrical Installations (Utility), NOM-001-SEDE. 1.1.2 These requirements cover motor control centres for use on circuits having available short-circuit currents…

ISO 15673:2005 applies to the planning, design and construction of structural reinforced concrete structures to be used in new low-rise buildings with restricted occupancy, number of stories, and area. The purpose of ISO 15673:2005 is to provide a registered civil engineer or architect with sufficient information to design the reinforced-concrete structural framing of a low-rise building that…

Gives a summary of the test methods that are used in the assessment of smoke obscuration. It presents a brief summary of static and dynamic test methods in common use, either as international standards or national or industry standards. It includes special observations on their relevance to electrotechnical products and their materials and to fire scenarios, and it gives recommendations on their…

This National Standard of Canada is based on International Standard CEI/IEC 60529:1989+A1:1999. 1 Scope and object This standard applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV. The object of this standard is to give: a) Definitions for degrees of protection provided by enclosures of…

1 Scope 1.1 This Standard specifies the requirements for single-conductor and multiple-conductor thermoset-insulated wires and cables rated 600 V, 1000 V, 2000 V, and 5000 V, for use in accordance with the rules of the Canadian Electrical Code (CEC), Part 1, CSA C22.1, in Canada, Standard for Electrical Installations, NOM-001-SEDE, in Mexico, and the National Electrical Code (NEC), NFPA-70, in…

1.1 Scope and object 1.1.1 This Standard applies to switchboards nominally rated at 600 V or less and intended for use in accordance with the Canadian Electrical Code, Part 1 (CE Code, Part 1), the National Electrical Code (NEC), ANSI/NFPA 70, and the Mexican Standard for Electrical Installations (Utility), NOM-001-SEDE. 1.1.2 In this standard the term switchboard is intended to refer to…

ISO 10966:2005 specifies the most important material characteristics for woven fabrics for awnings and camping tents. It can also be applied to other types of fabric. To meet the needs arising from different climatic conditions, different national habits in tent usage or different durability-expectations of the customer, the material requirements are split into two levels: A and B. Level A…