Rechercher

1.1 This Standard applies to gas convenience outlets (see Clause 3, Definitions), hereinafter referred to as gas outlets and optional enclosures, not to exceed 1-1/2 in (38.1 mm) and pressures not to exceed 5 psi (34.5 kPa), capable of operation at temperatures between 32°F and 200°F (0°C and 93.3°C) if intended for indoor use only, or between -20°F and 200°F (-28.8°C and 93.3°C) if intended…

This part of ISO 19901 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this part of ISO 19901 concerning modifications and…

This part of IEC 61000, which is informative in its nature, provides guidance on principles that can be used as the basis for determining the requirements for the connection of disturbing installations to low voltage (LV) public power systems. For the purposes of this part of IEC 61000, a disturbing installation means an installation (which may be a load or a generator) that produces disturbances…

1.1 This Standard shall apply to egress door securing and releasing devices to perform the function of holding a door in the closed position and releasing the door to permit free egress when operated. Egress door securing and releasing devices are considered ancillary devices and are not an integral part of the fire alarm system. 1.2 This Standard covers physical and performance requirements…

1.1 This Standard covers minimum requirements for shop fabricated aboveground protected tank assemblies that are used for the storage of flammable and combustible liquids with a specific gravity not greater than 1.0, that are compatible with the material of construction. 1.2 These protected tank assemblies consist of primary tanks provided with secondary containment and protective encasement…

IEC 60335-2-90:2015 deals with<br /> - the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances;<br /> - the safety of combination microwave ovens with a cavity door, the requirements for which are contained in Annex AA;…

IEC 60335-2-90:2015 deals with - the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances; - the safety of combination microwave ovens with a cavity door, the requirements for which are contained in Annex AA; - the safety of…

ISO/IEC 19785-1:2015 defines structures and data elements for biometric information records (BIRs). ISO/IEC 19785-1:2015 defines the concept of a domain of use to establish the applicability of a standard or specification that complies with CBEFF requirements. ISO/IEC 19785-1:2015 defines the concept of a CBEFF patron format, which is a published BIR format specification that complies with CBEFF…

ISO/IEC 19785-1:2015 defines structures and data elements for biometric information records (BIRs). ISO/IEC 19785-1:2015 defines the concept of a domain of use to establish the applicability of a standard or specification that complies with CBEFF requirements. ISO/IEC 19785-1:2015 defines the concept of a CBEFF patron format, which is a published BIR format specification that complies with CBEFF…

IEC 62317-13:2015 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of PQ-cores and low-profile PQI-cores made of ferrite, and the locations of their terminal pins on a 2,54 mm printed wiring grid in relation to the base outlines of the cores. The selection of core sizes for this standard is based on the philosophy of including those sizes…