Rechercher

This Standard covers medical electrical equipment that is intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. [Add the following note] Note 1A: Attention should be directed to the recommendations for patient monitoring during anaesthesia made by national, professional, and regulatory bodies. These recommendations include, but are not limited to,…

1.1 This Standard applies to manual lever operated, pressure lubricated, straight way gas shut-off valves, sizes NPS ¼ inch to 8 inch, of metallic construction with welded, or flanged, or threaded ends, for use with natural gas, manufactured gas, and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof that are suitable for use between…

1.1 This National Standard of Canada1 provides additional information to CAN/CGSB-32.310, Organic production systems — General principles and management standards, in the form of permitted substances to be used as annotated in accordance with the scope of the table in which they are listed. Use of a listed substance in a manner inconsistent with the scope of the table in which it appears is…

1.1 These requirements apply to Factory-Built Unvented Decorative Appliances that are intended to be fixed/non-movable and that use ethyl alcohol (ethanol) and isopropyl alcohol (isopropanol) in liquid or gel form as the fuel. These appliances are intended to be decorative in nature and limited to a maximum output of 3 kW (10,000 BTU/hour). Appliances that use fuel oils, kerosene, gasoline,…

1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of photovoltaic strings or arrays and their associated wiring to provide protection against overloads or short circuits within the marked electrical ratings in accordance with the Canadian Electrical Code (CSA C22.1 Canadian…

IEC TR 60083:2015 The object of this technical report is to give general information about the systems of plugs and socket-outlets for household and similar purposes which are used in the IEC countries. The report only contains National Systems which are commonly used in homes and offices. It is therefore limited to systems for a.c. with a rated voltage above 50 V but not exceeding 440 V,…

ISO 14817-1:2015 specifies the logical structure (framework) and the data content (substance) of intelligent transport systems (ITS) data dictionaries (DDs). Specifically, this part of ISO 14817 specifies the following: - framework used to identify and define all data concepts; - meta-attributes used to describe, standardize and manage each of the data concepts defined within this…

ISO 24014-1:2015 provides the basis for the development of multi-operator/multi-service Interoperable public surface (including subways) transport Fare Management Systems (IFMSs) on a national and international level. ISO 24014-1:2015 is applicable to bodies in public transport and related services which agree that their systems need to interoperate. While ISO 24014-1:2015 does not imply that…

IEC 60335-2-75:2012+A1:2015 deals with the safety of electric commercial dispensing appliances and vending machines for preparation or delivery of food, drinks and consumer products, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are bulk tea or coffee brewing machines,…

ISO/TR 18146:2015 contains non-normative information on spacecraft design and operational practices for mitigating space debris. ISO/TR 18146:2015 is a supporting document to the family of international standards addressing space debris mitigation (see 2.2). The purpose of these standards is to minimize the creation of additional space debris by ensuring that spacecraft and launch vehicle orbital…