Rechercher

1.1 This Standard sets forth requirements for smoke detectors and accessories, including mechanical guards to be employed in ordinary indoor locations in accordance with the following: In the United States: a) National Fire Alarm and Signaling Code, NFPA 72. In Canada: b) Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524; c) National Building Code of Canada; and d) National…

1.1 Requirements contained in this Standard cover controls of the light-sensitive or presence-sensitive types, or both; for indoor or outdoor service; intended for the control of indoor or outdoor loads up to a maximum of 20 A and maximum 347 V; intended for installations on 50 Hz or 60 HZ systems or DC up to 60 V (for US); and DC up to 42.4 V (for Canada); and intended to be installed in…

1 SCOPE 1.1 This Standard sets forth the minimum requirements for steel contained tank assemblies that are used for aboveground storage of flammable and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. 1.2 This Standard does not cover requirements for accessory devices and appurtenances such as overfill protection, spill…

This part of ISO 12402 speci®es the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close at hand under such circumstances where more bulky or buoyant devices can impair the user's activity. It applies to buoyancy aids used by adults or children. This part of ISO 12402 is not applicable to one-piece suits. 1DV.1…

This part of ISO 12402 speci®es the test methods for personal ¯otation devices. 1DV DR Addition to Clause 1 as follows: Where references are made to ISO 12402 standards, they shall be considered to be to UL 12402 with applicable Canadian / US National Differences where UL Standards exist. Where references are made to particular requirements within a part they shall include the associated…

ISO 11799:2015 specifies the characteristics of repositories used for the long-term storage of archive and library materials. It covers the siting and construction and renovation of the building and the installation and equipment to be used both within and around the building. It applies to all archive and library materials held in repositories, where mixed media may be stored together with paper…

ISO 10896-5:2015 defines design and safety requirements, and means for their verification, for the interface between a non-slewing or slewing variable-reach rough-terrain truck (hereafter referred to as "trucks") and an integrated personnel work platform (hereafter referred to as "integrated PWP"). ISO 10896-5:2015 does not address the design or safety requirements related to…

This International Standard specifies the characteristics and location of a magnetic stripe on a savingsbook as defined in Clause 4 and the use of such savingsbooks for international interchange. Compatibility with international interchange systems is provided through the requirements of this International Standard, enabling a savingsbook with a magnetic stripe to be read and possibly encoded…

1.1 This Standard applies to electric clothes dryers intended to be used in nonhazardous locations in accordance with the Canadian Electrical Code, Part I (CE Code, Part I) and the (U.S.) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 600 V. Note: Wherever practical, for convenience, the term ²appliance² has been used in lieu of ²clothes dryer² or ²machine²…

1.1 This Part applies to Fuseholders for Photovoltaic (PV) Systems rated to 1500 Vdc. 1.2 This Part applies to PV fuseholders that accommodate PV fuses as described in the Standard for Photovoltaic Fuses, CSA C22.2 No. 248-19 / UL 248-19 to be employed in Photovoltaic (PV) systems and that are intended to be used in accordance with the Canadian Electrical Code, Part I, and National Electrical…