Rechercher

This National Standard of Canada is equivalent to International Standard IEC 60601-2-51:2003. 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety, including essential performance, of RECORDING AND ANALYSING SINGLE CHANNEL AND MULTICHANNEL ELECTROCARDIOGRAPHS as defined in…

Cette norme du CSA et commune avec UL 1778. 1.1 Domaine d'application Remplacer cet article du DR par le texte qui suit: 1.1.1 Appareillage visé par cette norme Cette norme s'applique aux ALIMENTATIONS SANS COUPURE. La fonction essentielle d'une alimentation sans coupure, dans le contexte de cette norme, est d'assurer la continuité d'une alimentation électrique…

This National Standard of Canada is equivalent to International Standard IEC 61965:2003. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to CRTs…

Scope 1.1.1 This standard applies to newly produced, direct gas-fired industrial air heaters of the nonrecirculating type, hereinafter referred to as heaters, whose purpose is to offset building heat loss. All air to the heater shall be ducted directly from outdoors and the products of combustion generated by the heater are released into the air stream being heated. Heaters covered by this…

This National Standard of Canada is based on International Standard IEC 60745-2-1:2003, and is joint with UL 60745-2-1. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to drills and impact drills.

This National Standard of Canada is based on International Standard IEC 60745-2-2:2003, and is joint with UL 60745-2-2. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to screwdrivers and impact wrenches's.

This National Standard of Canada is based on International Standard IEC 60745-2-4:2002, and is joint with UL 60745-2-4. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered by this standard include but are not limited to belt sanders…

This National Standard of Canada is equivalent to International Standard IEC 60745-2-5:2003, and is joint with UL 60745-2-5. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to all types of circular saws. Circular saws hereinafter will be referred to as saws. This standard does not apply to saws used with abrasive wheels.

This National Standard of Canada is based on International Standard IEC 60745-2-6:2003, and is joint with UL 60745-2-6. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to hammers. Tools covered by this standard include but are not limited to percussion and rotary hammers.

This National Standard of Canada is equivalent to International Standard IEC 60745-2-8:2003, and is joint with UL 60745-8. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to shears and nibblers.