Rechercher

This International Standard identifies and establishes Methodologies, data and communication for service life planning and a systematic framework for undertaking service life planning of a planned building or construction work throughout its life cycle (or remaining life cycle for existing buildings or construction works). The life cycle incorporates initiation, project definition, design,…

This International Standard identifies and establishes Concepts, Principles and terminology for service life planning and a systematic framework for undertaking service life planning of a planned building or construction work throughout its life cycle (or remaining life cycle for existing buildings or construction works). The life cycle incorporates initiation, project definition, design,…

This proposed standard is applicable the analysis of plutonium (238Pu, 239Pu and 240Pu) in urine, which can be used for the internal dose monitoring of the public, occupational and rescue under accident conditions. The range of radioactivity are 1×10-4 Bq/L to 0.1 Bq/L for 238Pu and 1×10-5 Bq/L to 1×10-2 Bq/L for 239Pu and 240Pu. This standard introduces methods for the determination of…

This international standard applies to suspension diaphragms designed to be fitted on railway vehicles and similar vehicles running on dedicated tracks with permanent guide systems, whatever the type of rail and the running surface. This international standard does not detail other components of pneumatic suspension assemblies or control systems such as air reservoirs, frames, stiffeners,…

ISO 13802:2015 specifies frequency and methods for the verification of pendulum impact-testing machines used for the Charpy impact test, Izod impact test, and tensile impact test described in ISO 179‑1, ISO 180, and ISO 8256, respectively. Verification of instrumented impact machines is covered insofar as the geometrical and physical properties of instrumented machines are identical to non…

This document specifies test methods for the determination of the percentage of defective particles and of the microstructure of metallic blast-cleaning abrasives. This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning. The types of metallic abrasive and requirements on each are contained in the various parts of ISO 11124. The…

This International Standard specifies the required characteristics for metric plain or slotted (castellated) nuts, with MJ threads according to ISO 5855-2, for use in aerospace construction. It is applicable to nuts as defined above, provided that reference is made to this International Standard in the relevant definition document.

This International Standard specifies the required characteristics for metric self-locking nuts, with MJ threads, for use in aerospace construction at a maximum temperature less than or equal to 425 °C. It is applicable to nuts as defined above, provided that reference is made to this International Standard in the relevant definition document.

This International Standard specifies the coupling between handpieces and motors connected to dental units. This International Standard specifies the nominal dimensions, tolerances and the extraction force of coupling systems for use between handpiece and motor which supply the handpiece with water, air and light, and rotation energy.

This document specifies the general aspects of impact resistant unplasticized poly(vinyl chloride) (PVC-HI) solid wall piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. In conjunction with ISO 1452-1, 1452-2 and 1452-3, it is applicable to PVC-HI pipes, fittings, valves and ancillary equipment, their joints and to joints with…