Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Slots, projections and cart...
This International Standard specifies the dimensions and location sf cartridge Slots, projections and a hole for the Model II 8 mm Type S film Camera cartridge which, when included by the manufacturer, automatically preset some cameras in accordance with the effective film Speed, and insert or withdraw a colour-balancing f ilter. The combinations which are possible, together with the area…
Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm T...
This International Standard specifies the location and dimensions of the image area produced by the camera aperture on 8 mm Type R motion-picture film, and the dimensions of the maximum film image area intended for projection.
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Cartridge fit and take-up c...
This International Standard specifies the external dimensions of the 8 mm Type S film Camera cartridge, Model I 1, cartridge-Camera fit specifications, and core dimensions.
Gaseous halogenated hydrocarbons (liquefied gases) — Taking of a sample
Applicable for sampling from containers (cylinders, drums, tanks, etc.). Sampling of the product in a steel cylinder, previously cleaned, dried and evacuated. The stainless steel cylinder shall be capable of withstanding an internal pressure of at least 3 MPa (30 bar). The cylinder is filled to the filling ratio allowed by the safety considerations. Details are given in the relevant international…
Joints in building — General check-list of joint functions
Forms one of a series concerning joints in building. The series includes the following International Standards: ISO 2444 - Joints in building - Vocabulary; ISO 2445 - Joints in building - Fundamental principles for design. Gives a general check-list of functions of joints in building for use in their design.
Heat exchangers — Verification of thermal balance of water-fed or steam-fed primary circuits — Princ...
A number of suitable arrangements of test apparatus are illustrated in the annex. ISO 3147 is applicable to tests of primary circuits performed in the steady-state condition, in accordance with the specifications laid down for each type of appliance in the relevant International Standards. Where appropriate, special arrangements required for certain types of appliance may also be given in these…
Zinc alloys — Determination of copper content — Electrolytic method
The method is applicable to zinc alloy Zn Al 4 Cu 1. It is suitable for the determination of copper contents between 0,5 and 3,5 %. This International Standard specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.
