Rechercher

ISO 20508:2003 specifies a test method for determining the visible light transmittance of a transparent coating material, e.g., the transparent electrode for display devices, in which a fine ceramic thin film is coated on to a substrate. ISO 20508:2003 is not applicable to deliberately coloured, uneven or non-parallel faced test pieces. A translucent medium is not included in this International…

ISO 18756:2003 describes a test method that covers the determination of fracture toughness of monolithic ceramic materials at room temperature by the surface crack in flexure (SCF) method. This International Standard is intended for use with monolithic ceramics and whisker- or particulate-reinforced ceramics that are regarded as macroscopically homogeneous. It does not include continuous-fiber…

IS0 9018:2003 specifies the sizes of test pieces and test specimens and the procedure for carrying out tensile tests in order to determine the tensile strength and the location of fracture of welded joints with transverse stressed fillet welds. It applies to metallic materials with welded cruciform and lapped joints on plates. Information concerning evaluation of test results is not included in…

ISO 15169:2003 gives guidance on the selection, installation, commissioning, calibration and verification of hybrid tank measurement systems (HTMS) for the measurement of level, static mass, observed and standard volume, and observed and reference density in tanks storing petroleum and petroleum products in fiscal or custody transfer application. As it is a matter for the user to decide which…

ISO 20501:2003 covers the reporting of uniaxial strength data and the estimation of probability distribution parameters for advanced ceramics which fail in a brittle fashion. The failure strength of advanced ceramics is treated as a continuous random variable. Typically, a number of test specimens with well-defined geometry are brought to failure under well-defined isothermal loading conditions.…

ISO 16701:2003 defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or road de-icing salt. ISO 16701:2003 specifies the test apparatus and test procedure to be used in conducting the accelerated corrosion test to simulate, in a…

ISO 6807:2003 specifies the requirements for textile- and steel-reinforced rubber hoses and hose assemblies for use with water-based and/or oil-based muds, up to a maximum temperature of 82 °C, which are pumped at high pressure in large volumes in rotary drilling service and which, when tested in accordance with ISO 2977, have a minimum aniline point of 66 °C. This International Standard applies…

ISO 20340:2003 deals with the performance requirements for the protection, by protective paint systems, of new offshore and related structures exposed to the offshore atmosphere, as well as those immersed in sea or brackish water. ISO 20340 can also be used for other structures, provided that the selected paints or protective paint systems comply with this International Standard. This…

ISO 16862:2003 describes test methods for evaluating the sag resistance (resistance to sagging) of paints, varnishes and similar coating materials (coatings) when applied to a substrate and held in a vertical position. Evaluation of the sag resistance can be carried out after the coating has been applied as follows: using a sag index applicator on a horizontally placed test panel which is…

ISO/IEC TR 19760:2003 is a Technical Report that provides guidance for application of the International Standard ISO/IEC 15288 Systems Engineering - System life cycle processes in regard to systems and projects irrespective of size and type. ISO/IEC TR 19760:2003 can be used as a companion document to the International Standard by those who: apply the International Standard within their…