Rechercher

This International Standard specifies performance tests, designations, markings, dimensions and other requirements for secondary lithium single cells and batteries for portable applications. The objective of this standard is to provide the purchasers and users of secondary lithium cells and batteries with a set of criteria with which they can judge the performance of secondary lithium cells and…

ISO 9142:2003 describes laboratory ageing conditions under which adhesive joints may be exposed to various environmental influences -- climatic or chemical -- for the purpose of assessing the effects of such influences on certain properties. The ageing conditions are applicable to bonded assemblies and may be used to constitute a set of tests for the evaluation of an adhesive. The results…

ISO 16273:2003 applies to operational and performance requirements and methods of testing for night vision equipment fitted to high-speed craft in accordance with the International Code of Safety for High-Speed Craft (HSC code), Chapter 13, of the International Maritime Organisation (IMO) and the IMO performance standards MSC.94 (72) for night vision equipment for HSC.

ISO 18757:2003 provides guidelines for the determination of the total specific external and internal surface area of disperse or porous (pore diameter greater than 2 nm) fine ceramic materials by measuring the amount of physically adsorbed gas according to the method of Brunauer, Emmett and Teller (BET method). This International Standard only focuses on specific details relevant to fine ceramic…

This National Standard of Canada is based on Draft International Standard ISO/DIS 11193:2000. 1 Scope This National Standard specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended…

This National Standard of Canada is equivalent to International Standard ISO 13485:2003 (second edition, 2003-07-15). 1.1 General This International Standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements…

A257.0-03 Methods for Determining Physical Properties of Circular Concrete Pipe, Manhole Sections, Catch Basins, and Fittings 1 Scope 1.1 This Standard pertains to circular precast concrete pipe, manhole (maintenance hole) sections, and accessories intended for use as sewer pipe for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2…

ISO 23794:2003 provides guidance on the determination of the abrasion resistance of vulcanized and thermoplastic rubbers. It covers both solid and loose abrasives. The guidelines given in ISO 23794:2003 are intended to assist in the selection of an appropriate test method and appropriate test conditions for evaluating a material and assessing its suitability for a product subject to abrasion.…

ISO 15312:2003 defines the thermal speed rating for oil bath lubricated rolling bearings and defines calculation principles for the determination of this parameter. The parameter determined in accordance with this International Standard applies to rolling bearings of the given series and sizes of standard design or of a design that, from a frictional point of view, can be related to a standard…

ISO 15306:2003 specifies a method for determining the resistance of glass-reinforced thermosetting plastics (GRP) pipes to cyclic internal pressure. Whilst the standard refers to pipes, the procedure described can also be applied to fittings.