Rechercher

ISO 6930-2:2004 specifies the requirements for weldable high yield strength steels for cold forming. It applies to plates and wide-flats, hot-rolled on reversing mills, both having a thickness between 4 mm and 50 mm (inclusive) and supplied in the normalized, normalized rolled and as-rolled delivery condition. It does not apply to weldable structural steels, whether or not of special quality,…

ISO 11402:2004 specifies three methods for determining the free-formaldehyde content in the following: Phenolic resins, by potentiometric titration in aqueous or organic solution (hydroxylamine hydrochloride procedure). The method is applicable to resins with free-formaldehyde contents up to and including 15 % by mass. For free-formaldehyde contents between 15 % by mass and 30 % by mass, it may…

This National Standard of Canada is based on International Standard IEC 60745-2-1:2003, and is joint with UL 60745-2-1. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to drills and impact drills.

This National Standard of Canada is based on International Standard IEC 60745-2-2:2003, and is joint with UL 60745-2-2. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to screwdrivers and impact wrenches's.

This National Standard of Canada is based on International Standard IEC 60745-2-4:2002, and is joint with UL 60745-2-4. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered by this standard include but are not limited to belt sanders…

This National Standard of Canada is equivalent to International Standard IEC 60745-2-5:2003, and is joint with UL 60745-2-5. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to all types of circular saws. Circular saws hereinafter will be referred to as saws. This standard does not apply to saws used with abrasive wheels.

This National Standard of Canada is based on International Standard IEC 60745-2-6:2003, and is joint with UL 60745-2-6. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to hammers. Tools covered by this standard include but are not limited to percussion and rotary hammers.

This National Standard of Canada is equivalent to International Standard IEC 60745-2-8:2003, and is joint with UL 60745-8. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to shears and nibblers.

This National Standard of Canada is based on International Standard IEC 60745-1:2003, and is joint with UL 60745-1. 1 Scope 1.1 This International Standard deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. So far as is…

This National Standard of Canada is equivalent to International Standard IEC 60745-2-9:2003, and is joint with UL 60745-2-9. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to tappers.