Rechercher

ISO 5145:2004 establishes practical criteria for determining valve outlet connections for gas cylinders. It applies to the selection of gas cylinder valve outlet connections and specifies the dimensions of a number of them. ISO 5145:2004 does not apply to connections used for cryogenic gas withdrawal or gases for breathing equipment which are the subject of other International Standards.

Gives the general terminology used in the fields of primary and secondary cells and batteries, and reflects the technology, design, construction, performance and application employed. It has the status of a horizontal standard in accordance with IEC Guide 108.

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-26:2003. 1 Scope and object *1.1 Scope Addition: This Particular Standard specifies the particular safety requirements for ELECTRO-ENCEPHALOGRAPHS as defined in 2.2.103 and also referred to as EQUIPMENT. The special requirements for other equipment also used in electroencephalography are not covered by…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-33:2002. 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to MAGNETIC RESONANCE EQUIPMENT as defined in 2.2.101 and MAGNETIC RESONANCE SYSTEMS as defined in 2.2.102. This Standard does not cover the application of…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-49:2001. 1 Scope and object *1.1 Scope This Particular Standard applies to the safety requirements of MULTIFUNCTION PATIENT MONITORING EQUIPMENT as defined in subclause 2.2.101. The scope of this standard is restricted to EQUIPMENT having either more than one APPLIED PART or more than one SINGLE FUNCTION,…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-51:2003. 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety, including essential performance, of RECORDING AND ANALYSING SINGLE CHANNEL AND MULTICHANNEL ELECTROCARDIOGRAPHS as defined in…

This National Standard of Canada is equivalent to International Standard IEC 61965:2003. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to CRTs…

ISO 10542-5:2004 specifies test methods as well as requirements for design and performance, for instructions and warnings to installers and users, and for product marking and labelling of wheelchair tiedown and occupant restraint systems (WTORS). It applies only to WTORS that are intended to be used with particular makes and models of wheelchairs when used as a forward-facing seat by a passenger…

ISO 3580:2004 specifies requirements for classification of covered electrodes, based on the all-weld metal in the heat-treated condition, for manual metal arc welding of ferritic and martensitic creep-resisting and low alloy elevated temperature steels. This International Standard is a combined specification for classification utilizing a system based upon the chemical composition of the all-weld…

ISO/IEC 18092:2004 defines communication modes for Near Field Communication Interface and Protocol (NFCIP-1) using inductive coupled devices operating at the centre frequency of 13,56 MHz for interconnection of computer peripherals. It also defines both the Active and the Passive communication modes of NFCIP-1 to realize a communication network using Near Field Communication devices for networked…