Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 60743:2001, IDT. 1.1 Scope This International Standard applies to the terminology used to describe tools, equipment, devices and methods used in live working. IEC 60050(651) gives the definitions of all terms used in live working. The present standard permits identification of the tools, equipment and devices and…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60895:2002, IDT. 1 Scope This International Standard is applicable to conductive clothing, either assembled from component parts or forming a single complete clothing, worn by (electrically) skilled persons during live working (especially bare-hand working) at a nominal power system voltage up to 800 kV a.c…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60903:2002, IDT. 1 Scope This International Standard is applicable to: - insulating gloves and mitts which should normally be used in conjunction with leather protector gloves worn over the insulating gloves to provide mechanical protection; - insulating gloves and mitts usable without over-gloves for mechanical…

1. SCOPE 1.1 This standard applies to two grades of aviation gasoline. 1.2 The aviation gasoline is intended for use in internal combustion aircraft engines with spark ignition. 1.3 Limitations for Use - Operators should consult their aircraft manual for the appropriate grade. 1.4 The testing and evaluation of a product against this standard may require the use of materials and/or equipment…

La présente norme nationale du Canada est équivalente à la norme internationale ISO/CEI 14651:2001. 1 Domaine d'application Cette Norme internationale définit: - une méthode de référence pour la comparaison de deux chaînes de caractères ayant pour but de déterminer leur ordre de classement dans une liste triée. La méthode s'applique à des chaînes utilisant le répertoire complet…

This International Standard applies to twist-on connecting devices for connecting two or more unprepared rigid and/or flexible copper conductors having a cross-sectional area of 0,5 mm2 up to and including 16 mm2 and complying with IEC 60228, the total cross-sectional area of the connected conductors not exceeding 35 mm2. It covers low voltage circuits up to 1 000 V a.c. and 1 500 V d.c. where…

Gives the general terminology used in industrial electroheat, as well as terms pertaining to specific applications and associated technologies. Includes terms related to electrode, laser and ultrasonic heating. It has the status of a horizontal standard in accordance with IEC Guide 108.

ISO 9591:2004 specifies a method for the determination of resistance to stress corrosion cracking (SCC) of aluminium alloys. It covers the method of sampling, the types of specimens, the loading procedure, the type of environment and the interpretation of results. This International Standard is aimed at determining resistance to SCC as a function of the chemical composition, the method of…

ISO 5263-3:2004 specifies an apparatus and the procedures for the laboratory wet disintegration of mechanical pulps that exhibit latency. This apparatus and procedure are required for preparation of the test portion in a number of other International Standards dealing with pulps. ISO 5263-3:2004 is applicable to all kind of mechanical pulps (i.e. mechanical, semi-chemical and chemo-mechanical…

ISO 23529:2004 specifies conditions and procedures for the preparation, measurement, marking, storage and conditioning of rubber test pieces for use in physical tests specified in other International Standards, and the preferred conditions to be used during the tests. Special conditions applicable to a particular test or material or simulating a particular climatic environment are not included,…