Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 5431 - 5440 de 9490
Household and Similar Electrical Appliances - Safety - Part 2-31: Particular Requirements for Range ...
This National Standard of Canada is based on International Standard IEC 60335-2-31:2002. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric range hoods intended for installing above household cooking ranges, hobs and similar cooking appliances, their rated voltage being not more than 250 V. NOTE 101 The cooking appliance…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
2005-02-28
Code(s) de l'ICS :
97.040.99; 97.030
Household and Similar Electrical Appliances - Safety - Part 2-76: Particular Requirements for Electr...
This National Standard of Canada is based on International Standard IEC 60335-2-76:2002. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, feral animal control and security fences may be electrified…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
2005-02-28
Code(s) de l'ICS :
91.090; 91.090
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete V...
This National Standard of Canada is equivalent to International Standard IEC 60745-2-12; and is joint with UL 60745-2-12. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to concrete vibrators.
Éditeur :
CSA
Statut :
Norme
Date de publication :
2005-02-28
Code(s) de l'ICS :
13.110; 13.110
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping ...
This National Standard of Canada is equivalent to International Standard IEC 60745-2-18:2003, and is joint with UL 60745-2-18. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to strapping tools.
Éditeur :
CSA
Statut :
Norme
Date de publication :
2005-02-28
Code(s) de l'ICS :
25.140.20
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular Requirements for Band Saws
This National Standard of Canada is equivalent to International Standard IEC 60745-2-20:2003, and is joint with UL 60745-2-20. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to band saws.
Éditeur :
CSA
Statut :
Norme
Date de publication :
2005-02-28
Code(s) de l'ICS :
25.140.20
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-21: Particular Requirements for Drain Clea...
This National Standard of Canada is equivalent to International Standard IEC 60745-2-21:2002, and is joint with UL 60745-2-21. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to drain cleaners.
Éditeur :
CSA
Statut :
Norme
Date de publication :
2005-02-28
Code(s) de l'ICS :
25.140.20; 91.140.70
Information techonology - Small computer system interface (SCSI) - Part 222: Fibre Channel Protocol ...
The SCSI protocol is designed to provide an efficient peer-to-peer I/O bus with the maximum number of hosts and peripherals determined by the bus width (8 or 16). Data may be transferred asynchronously or synchronously at rates that depend primarily on device implementation and cable length. SCSI is an I/O interface that may be operated over a wide range of media and transfer rates. This…
Éditeur :
IEC
Statut :
Publié
Date de publication :
2005-02-22
Code(s) de l'ICS :
35.200
Classification of coals
ISO 11760:2005 describes a simple classification system for coals providing guidance on the selection of the appropriate ISO standard procedures for the analyses and testing, international comparison in terms of some key characteristics and descriptive categorization of coals. The system is applicable to coals of all ranks, but care is required in relation to the classification of some types of…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2005-02-17
Code(s) de l'ICS :
73.040
Medical laboratories — Guidance on laboratory implementation of ISO 15189: 2003
ISO/TR 22869:2005 provides guidance to medical laboratories describing how a medical laboratory can implement a quality system to meet the specific technical and management requirements for quality and competence in ISO 15189:2003. Bodies engaged in the recognition of the competence of medical laboratories may also be able to use ISO/TR 22869:2005 as a basis to assist laboratories in establishing…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
2005-02-16
Code(s) de l'ICS :
11.100.01
Information technology -- Programming languages -- Guide for the use of the Ada Ravenscar Profile in...
The electronic version of this International Standard can be downloaded from the ISO/IEC Information Technology Task Force (ITTF) web site. ISO/IEC TR 24718:2005 gives a complete description of the motivations behind the Ada Ravenscar Profile, to show how conformant programs can be analysed and to give examples of usage. The profile is a subset of the Ada tasking model, restricted to meet the…
Éditeur :
IEC
Statut :
Révisé
Date de publication :
2005-02-16
Code(s) de l'ICS :
35.060

Spacer