Rechercher

ISO 17642-2:2005 specifies the sizes of the test pieces, the specimens and the procedures for carrying out self-restraint cold cracking tests by: CTS (controlled thermal severity) test Tekken (Y-groove) or Lehigh (U-groove) test in order to obtain information about the cold cracking sensitivity during welding. This International Standard applies primarily, but not exclusively, to C-Mn and low-…

ISO 17642-3:2005 specifies the sizes of the backing plates, specimens and procedures for carrying out externally loaded cold cracking tests by implant testing in order to obtain information about the cold cracking sensitivity during welding. This International Standard applies primarily, but not exclusively, to C-Mn and low alloy steels.

ISO 2063:2005 applies to thermal-sprayed metallic coatings for the protection of iron and steel against corrosion by applying zinc or aluminium or their alloys to uncoated surfaces to be protected. This International Standard deals with characteristic properties and gives test methods for coatings obtained by the spraying of zinc and aluminium and their alloys for the general purpose of corrosion…

The SCSI protocol is designed to provide an efficient peer-to-peer I/O bus with the maximum number of hosts and peripherals determined by the bus width (8 or 16). Data may be transferred asynchronously or synchronously at rates that depend primarily on device implementation and cable length. SCSI is an I/O interface that may be operated over a wide range of media and transfer rates. This…

ISO 13792:2005 specifies the required input data for simplified calculation methods for determining the maximum, average and minimum daily values of the operative temperature of a room in the warm period to define the characteristics of a room in order to avoid overheating in summer at the design stage, and to define whether the installation of a cooling system is necessary or not. The criteria…

ISO 18777:2005 specifies requirements for the safety and essential performance of transportable liquid oxygen systems which are used as a supply source for oxygen therapy. These devices usually consist of a portable unit to be carried by or with the patient whilst in use and the vessel used to refill the portable unit. These devices are mostly used in home care applications and in health care…

ISO 18778:2005 specifies requirements for the safety and essential performance of monitors used to detect apparent life-threatening events in sleeping or resting children under three years of age. This International Standard applies to devices used in home care applications. These monitors are generally used without continual professional supervision. ISO 18778:2005 also applies to the…

ISO 18779:2005 specifies requirements for the safety and essential performance of portable devices that supply the flow of oxygen or oxygen mixtures during therapy (e.g. long term oxygen therapy, analgesia). These devices are intended to conserve oxygen or oxygen mixtures by delivering these gases intermittently on the patient's demand when used in home care applications. These devices are…

ISO 11443:2005 specifies methods for determining the fluidity of plastics melts subjected to shear stresses at rates and temperatures approximating to those arising in plastics processing. Testing plastics melts in accordance with these methods is necessary since the fluidity of plastics melts is generally not dependent solely on temperature, but also on other parameters, in particular shear rate…

This National Standard of Canada is based on International Standard ISO 15190:2003. 1 Scope This International Standard specifies requirements for safe practices in the medical laboratory.