Rechercher

ISO/IEC 11694-2:2005 is one of a series of International Standards defining the parameters for optical memory cards and the use of such cards for the storage and interchange of digital data. ISO/IEC 11694 recognizes the existence of different methods of recording and reading information on optical memory cards, the characteristics of which are specific to the recording method employed. ISO/IEC…

ISO/IEC 11694-1:2005 is one of a series of International Standards defining the parameters for optical memory cards and the use of such cards for the storage and interchange of digital data. ISO/IEC 11694 recognizes the existence of different methods of recording and reading information on optical memory cards, the characteristics of which are specific to the recording method employed. ISO/IEC…

ISO/IEC 11694-2:2005 is one of a series of International Standards defining the parameters for optical memory cards and the use of such cards for the storage and interchange of digital data. ISO/IEC 11694 recognizes the existence of different methods of recording and reading information on optical memory cards, the characteristics of which are specific to the recording method employed. ISO/IEC…

ISO 20126:2005 specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use. Specifically excluded are manual interdental brushes and powered oral hygiene devices as these instruments are covered by separate International Standards.

This International Standard specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast. This standard covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to…

This International Standard deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and mechanical safety. This standard covers the following types of dry-type transformers, power supplies, including switch mode power supplies, and reactors, the windings of which may be encapsulated or non-encapsulated It has the status of a group…

1 Scope 1.1 This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a RATED VOLTAGE not exceeding 440 V and a RATED CURRENT not exceeding 63 A. These switches are intended to be operated by a person,…

1 Scope 1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of the Canadian Electrical Code, Part I (…

ISO 9994:2005 establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. The safety specification given in this International Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other…

ISO 22254:2005 specifies a test method for determining the resistance of the tufted portion of manual toothbrushes to deflection. This International Standard is applicable to toothbrushes having a conventional flat trim design and may not be applicable to toothbrushes with other designs. The results obtained with this International Standard may not correspond to consumer perceptions of the…