1. Scope
1.1 This Standard applies to rigid unplasticized poly (vinyl chloride) boxes and fittings of the following types that are intended to be installed and used with rigid PVC conduit at a maximum working temperature of 75°C in accordance with the rules of the Canadian Electrical Code, Part I:
(a) junction boxes with an interior volume of 1640 mL× or less that are intended to provide…
Applies to the design of highway bridges that have spans up to
l00 m, and is based upon the limit states design theory. It sets
forth minimum requirements that are consistent with current
practice. Modifications may be necessary in order to adapt the
Standard for use in the design of a specific bridge, unusual
types of bridges, and bridges with spans longer than 100 m.
Shipbuilding and marine structures — Trunnion pieces for span bearings and lead block bearings
Specifies dimensions and materials. Trunnion pieces are divided into three types: type A with a single lower eye, type B with a centrally-located eye and type C with two eyes, one upper and one lower.
Supplement No.3-1982 to CSA Standard CAN3-S6-M78, Design of Highway Bridge
Applies to the design of ordinary highway bridges that have spans
up to 100 m and other bridges to carry pedestrian, cyclist or
equestrial traffic. It deals with the general features of
highway bridges and loads and forces applicable to their design
considering different materials such as steel, concrete, timber
and composite structures. It gives design consideration for
substructures,…
Supplement No.2-1981 to CSA Standard CAN3-S6-M78, Design of Highway Bridges
Applies to the design of ordinary highway bridges that have spans
up to 100 m and other bridges to carry pedestrian, cyclist or
equestrial traffic. It deals with the general features of
highway bridges and loads and forces applicable to their design
considering different materials such as steel, concrete, timber
and composite structures. It gives design consideration for
substructures,…
Textiles — Cotton fibres — Determination of length (span length) and uniformity index
This method is applicable to fibres taken from raw or partially processed cotton, but not to fibres taken from blends of cotton with other fibres, or to fibres recovered from cotton yarns or fabrics. The main terms are defined.
Supplement No.1-1980 to CSA Standard CAN3-S6-M78, Design of Highway Bridges
Applies to the design of ordinary highway bridges that have spans
up to 100 m and other bridges to carry pedestrian, cyclist or
equestrial traffic. It deals with the general features of
highway bridges and loads and forces applicable to their design
considering different materials such as steel, concrete, timber
and composite structures. It gives design consideration for
substructures,…
Load Test Procedure for Wood Roof Trusses for Houses and Small Buildings
1. Scope
1.1 General
This Standard covers the load test procedure for evaluating the
strength and deformation performance of wood roof trusses intended for
use in housing and small buildings as defined in Part 9 of the National
Building Code of Canada.
Note: Part 9 of the National Building Code of Canada provides detailed
requirements…
Applies to the design of ordinary highway bridges that have spans
up to 100 m and other bridges to carry pedestrian, cyclist or
equestrian traffic. It deals with the general features of highway
bridges and loads and forces applicable to their design
considering different materials such as steel, concrete, timber
and composite structures. It gives design consideration for
substructures, and…