1.1 Scope
1.1.1 Scope of Code
This Code applies to the design, evaluation, and structural rehabilitation design of fixed and movable highway bridges in Canada. There is no limit on span length, but this Code does not necessarily cover all aspects of design for every type of long-span bridge. This Code also covers the design of pedestrian bridges, retaining walls, barriers, and highway accessory…
Commentary on CAN/CSA-S6-06, Canadian Highway Bridge Design Code
C1.1 Scope
C1.1.1 Scope of Code
The OHBDC (MTO 1991) was written for application within Ontario. CAN/CSA-S6-88 was generated with interprovincial co-operation for use in the other provinces of Canada and was largely derived from the preceding OHBDC edition. The provinces and CSA then agreed that the successor edition to both codes would be the Code, published by CSA. The Code has been written…
Glass in building — Glass blocks — Specification and test methods
ISO 21690:2006 specifies requirements for the properties of glass blocks used for the construction of non-load-bearing walls and horizontally spanning panels. ISO 21690:2006 also specifies test methods used to verify these properties for square, rectangular and circular glass blocks.
Information technology — Generic cabling for customer premises — Mid-span DTE power insertion
Specifies mid-span power insertion into generic cabling as specified in ISO/IEC 11801, the location and allocation requirements in case of the replacement of a generic cabling component or components.
Information technology - Generic cabling for customer premises - Mid-span DTE power insertion
Specifies mid-span power insertion into generic cabling as specified in ISO/IEC 11801, the location and allocation requirements in case of the replacement of a generic cabling component or components.
Information technology - Multimedia content description Interface - Part 11: MPEG-7 profile schemas
ISO/IEC TR 15938-11:2005 contains the actual schema in XSD form for each of the ISO/IEC 15938-9 standard description profiles, namely the Simple Metadata Profile (SMP), User Description Profile (UDP), and the Core Description Profile (CDP) as describe below:
Simple Metadata Profile (SMP) -- describes simple metadata tagging for single instances of multimedia clips. This profile can be used in…
Information technology — Multimedia content description Interface — Part 11: MPEG-7 profile schemas
ISO/IEC TR 15938-11:2005 contains the actual schema in XSD form for each of the ISO/IEC 15938-9 standard description profiles, namely the Simple Metadata Profile (SMP), User Description Profile (UDP), and the Core Description Profile (CDP) as describe below:
Simple Metadata Profile (SMP) -- describes simple metadata tagging for single instances of multimedia clips. This profile can be used in…
LIVE WORKING – GUIDELINES FOR THE INSTALLATION OF DISTRIBUTION LINE CONDUCTORS – STRINGING EQUIPMENT...
1 Scope
The present Technical Report provides recommendations for the selection and testing, where
necessary, of conductor stringing equipment and accessory items used for the installation of
bare and insulated overhead distribution conductors.
Procedures are recommended for proper earthing in order to protect equipment, components
and personnel from currents which can result from accidental…
Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point me...
ISO 11093-6:2005 specifies a three-point method for the determination of the bending strength of cylindrical board cores which meet the following criteria: internal diameter: 50 mm to 300 mm; minimum wall thickness: 5 mm; minimum test length of core (span): 1 100 mm.
Information technology — Multimedia content description interface — Part 9: Profiles and levels
ISO/IEC 15938-9:2005 collects standard profiles and levels for MPEG-7, specified across all parts of ISO/IEC 15938. While all parts are potential candidates for profiling, current profiles concentrate on the Description definition language [ISO/IEC 15938-2], Visual [ISO/IEC 15938-3], Audio [ISO/IEC 15938-4], Multimedia description schemes [ISO/IEC 15938-5], which are based on the namespace…