Rechercher

La présente partie de l’ISO 19901 fournit des exigences générales relatives à la détermination et à l’utilisation des conditions océanographiques et météorologiques («océano-météorologiques») pour la conception, la construction et l’exploitation des structures en mer de tous les types utilisés dans les industries du pétrole et du gaz naturel. Les exigences sont scindées en deux grandes catégories…

IEC 60335-2-2:2009+A1:1012+A2:2016 deals with the safety of electric vacuum cleaners and water-suction cleaning appliances for household and similar purposes, including vacuum cleaners for animal grooming, their rated voltage being not more than 250 V. It also applies to centrally-sited vacuum cleaners and automatic battery-powered cleaners. This standard also applies to motorized cleaning heads…

L'IEC 60335-2-67:2012+A1:2016 traite de la sécurité des machines detraitement des sols à usage commercial, intérieur ou extérieur, pour les applications suivantes: - brossage, - ramassage à sec ou en présence d'eau, - lustrage et polissage à sec, - application de cire, de produits d'étanchéité et de détergents à base de poudre, - nettoyage par shampouineuse, - décapage,…

L'IEC 60335-2-68:2012+A1:2016 traite de la sécurité des machines de nettoyage par pulvérisation et aspiration électriques mobiles non auto-motrices, avec ou sans accessoires et avec ou sans éléments chauffants électriques, destinées à un usage commercial à l'intérieur des locaux. La présente norme s'applique aux machines à usage commercial. La liste suivante, sans être exhaustive,…

ISO 18886:2016 specifies the procedures for the preparation of test pieces from refractory materials by wet gunning at ambient temperatures. The test pieces are for the determination of properties on wet-gunned products prepared under either "standard conditions" (as required for quality assurance or product development) or "site conditions". In the case of "site…

ISO 17183:2016 specifies the procedure to screen highly contaminated soils to detect organic compounds extractable with isopropanol, including a wide range of fuels, oils, and greases. The method is useful for finding hot spots. It is applicable both in laboratories and for site screening in the field. The working range is approximately 0,01 to 0,3 in absorbance units, corresponding to…

ISO 5667-24:2016 provides an audit protocol to monitor conformity with declared, or assumed, practices in all areas of water quality sampling. Specifically, this part of ISO 5667 provides guidance on the systematic assessment of sampling practices and procedures in the field, and assessing conformity with those given in the organization's sampling manual. It is applicable to the audit of…

This part of ISO 19901 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries. The requirements are divided into two broad types: — those that relate to the determination of environmental conditions in general,…

This Guideline has been developed as a complementary document to CSA Z195-14, Protective footwear. It is intended to provide advice to protective footwear users and authorities having jurisdiction. While this Guideline is intended to be used separately from the Standard, many references are made to the Standard and most of the advice is based on the design, performance, and marking criteria…

1.1 This Standard specifies the design, installation, operation and maintenance of site-built and modular gaseous hydrogen fueling stations (HFS) for light duty vehicles, where light duty vehicles are defined by the Environmental Protection Agency as passenger cars and light trucks, minivans, passenger vans, pickup trucks, and sport-utility vehicles, also referred to as the “common category”…